Hot on an Electrolux induction cooktop is the hot surface indicator, not an error. It shows in the setting display for a cooking zone that is turned off but still warm from the cookware. Keep your hands off the glass until Hot goes out.
Hot on an Electrolux induction cooktop is the hot surface indicator, not an error. It shows in the setting display for a cooking zone that is turned off but still warm from the cookware. Keep your hands off the glass until Hot goes out.
Use & Care Manual, Induction cooktop, A01704702-A-072020
What Electrolux cooktop Hot means.
What it means
Hot on an Electrolux induction cooktop is the hot surface indicator, not an error. It shows in the setting display for a cooking zone that is turned off but still warm from the cookware. Keep your hands off the glass until Hot goes out.
What you can safely check
Do not touch the glass or place anything on a zone that shows Hot.
When to call a technician
A cooking zone ran long enough to get hot and Hot did not show.
Your checklist, kept on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Stay clear of the zone
Do not touch or wipe the glass while Hot is showing, and keep cloths and plastic away from it.
Illustration. Follow your model’s instructions.
Check 2
Wait for Hot to go out
Electrolux says the display stays visible until the glass over that zone has cooled enough to be safe.
Illustration. Follow your model’s instructions.
Check 3
Check the control area if it feels warm
If the panel itself heats up, the guide blames cookware that is too large or too close to the controls and suggests using a rear zone.
Illustration. Follow your model’s instructions.
Check 4
Book a visit only if Hot never appears
If a zone ran long enough to get hot and Hot did not show, that is the case the guide says to have looked at.
Still showing Hot?
Send us the model and the checks you have done, and open your request here.
The guide's Other Problems table says the cooktop may simply not have got hot enough to trigger it. If the zone ran long enough to heat the glass and Hot stayed dark, it says to have it serviced.