What it means
HIGH TEMP on an Electrolux freezer is the red warm-cabinet alarm. The temperature has risen above the safe range. Close the door, check your food, then press HIGH TEMP to reset the alarm.
Electrolux freezer HIGH TEMP / Temperature and alarms
HIGH TEMP on an Electrolux freezer is the red warm-cabinet alarm. The temperature has risen above the safe range. Close the door, check your food, then press HIGH TEMP to reset the alarm.
Also shown as HIGH TEMP
HIGH TEMP on an Electrolux freezer is the red warm-cabinet alarm. The temperature has risen above the safe range. Close the door, check your food, then press HIGH TEMP to reset the alarm.
Judge frozen food by its condition and how long it was warm.
HIGH TEMP returns after the door is sealing and the setting is correct.
Your checklist, kept on this device

A door that is ajar or not seating is a listed cause of a warm cabinet.

Decide what is still safe to eat before you reset the alarm.

That key resets the alarm.
A control turned too warm, or a large batch of warm food, can lift the temperature too.
A freezer that was switched off may need up to a full day to return to temperature.
Send us the model and the checks you have done, and open your request here.
Book a visitA simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
Once the cabinet climbs beyond its safe range, a red HIGH TEMP LED lights and the alarm sounds.
Read the supporting manualIts causes for a warm interior run: control too warm, door opened too often, door not seated, a large warm load, and a recent period without power.
Read the supporting manualNo. In Sabbath mode the alarm stays active and comes on when the cabinet is outside the safe zone for 20 minutes.
Read the supporting manualManufacturer document
Electrolux (document served from the sister brand's asset library)
A16366405 (May 2024) / PDF p.19 (Controls and Settings, Alarms)
Manufacturer document
Electrolux (document served from the sister brand's asset library)
A16366405 (May 2024) / PDF p.30-31 (Troubleshooting)
Manufacturer document
Electrolux (document served from the sister brand's asset library)
A16366405 (May 2024) / PDF p.21 (Sabbath Mode)
Electrolux all-freezer Use & Care Guide A16366405 (May 2024).
Treat it that way for food. Check the contents promptly.
You can. If it returns, find the cause.
The guide describes an alarm, not a sensor error.
A HIGH TEMP light that keeps returning even though the door seals and the setting is right.
Codes, symptoms, parts and service
A lit POWER OUTAGE light on the freezer control is a memory of an interruption: electricity stopped for a while, so the cabinet may have drifted above its safe range. Inspect the food before anything else, then press POWER OUTAGE to acknowledge the alarm.
Electrolux explains freezer frost as warm air meeting cold air under 32 F. It names a door or gasket that fails to seal, a chute flap left open, a setting under 0 F and food that blocks airflow.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.