Electrolux dishwasher ER-11 / Dishwasher

Electrolux dishwasher
error ER-11

Electrolux's dishwasher articles we hold explain i20, i40, 01-24, Hd and HO, plus PF, but none prints ER-11. We give it no meaning. Run the dishwasher once more after a reset, clean the filter and glass trap, and book a visit if ER-11 returns.

Not explained in the manuals we reviewed

Last reviewed

ER-11
ER-11Dishwasher
Manual evidence

What the manual says about Electrolux dishwasher ER-11.

Manual evidence

Nothing prints ER-11. The Owner Center dishwasher articles at hand (1830334, 1830362, 1830367, 1831281 and 1853201) explain i20, i40, 01-24, Hd and HO, and describe the general alarms and codes, not ER-xx numbers.

Safe first steps.

  1. 1

    Turn it off and on

    Cancel the program, power the unit down at its controls, count to sixty and run a short cycle to see whether ER-11 returns.

  2. 2

    Clean the glass trap and filter

    Take out the filter and glass trap and rinse off food residue. Electrolux names this as the cure for its i40 message, and it helps any drainage trouble.

  3. 3

    Check the drain hose

    Look for a kink or a blockage in the drain hose and, if you have a disposer, confirm the knockout plug was removed, as the i20 article says.

Write these details down before you phone.

Dishwashers in a thoughtfully designed home
  • Model and serial number
  • Full display text
  • When the message appears
  • Checks already made

When to call.

ER-11 returns after a restart, the tub keeps holding water, or the dishwasher stops before the cycle ends.

Book a visit(844) 834-2361

The documents we checked.

Source 1

Dishwasher Error Code i20 - Unit did not drain properly

Electrolux / Owner Center knowledge base / Owner Center article 1830367, cached 10.11.2026 (no edition date printed) / Article text

Source 2

Dishwasher Error Code i40 - Clogged filter or sump

Electrolux / Owner Center knowledge base / Owner Center article 1831281, cached 10.11.2026 (no edition date printed) / Article text

Source 3

How to Use Your Dishwasher: Alarms & Codes

Electrolux / Owner Center knowledge base / Owner Center article 1853201, cached 10.11.2026 (no edition date printed) / Article text

Here to help

Good questions.
Clear answers.

Talk to our team
What does ER-11 mean on an Electrolux dishwasher?

The documents we hold do not say. They explain other messages, such as i20 and i40, and a guess for ER-11 might point you at an innocent component.

Is ER-11 a drain problem like i20?

We can't confirm that. i20 is printed as a failure to drain, but no article places ER-11 in that group.

Can I use the dishwasher while ER-11 shows?

After one restart, a short cycle is reasonable if it fills and drains normally. If ER-11 comes back, or the tub keeps holding water, hold off and book a visit.

What should I note before booking for ER-11?

The model from the door label, the display as shown and the stage of the cycle when ER-11 appeared.

Let’s take care of it.

Premium appliances deserve
careful service.