On the 2014-style panel, a flashing Power Failure indicator records that the supply was interrupted. The status light is off and, unusually, no tone sounds. A quick press of On/Off clears it, and a brand-new cooler shows it at first start-up too.
On the 2014-style panel, a flashing Power Failure indicator records that the supply was interrupted. The status light is off and, unusually, no tone sounds. A quick press of On/Off clears it, and a brand-new cooler shows it at first start-up too.
On the 2014-style panel, a flashing Power Failure indicator records that the supply was interrupted. The status light is off and, unusually, no tone sounds. A quick press of On/Off clears it, and a brand-new cooler shows it at first start-up too.
What you can safely check
Unplug the cooler before touching the cord or anything behind the grille, and leave the cooling system to a technician.
When to call a technician
The indicator returns while the household supply stays steady.
Your checklist, kept on this device
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Check the supply first
If the cooler is still dead, look at the breaker and the plug, as the troubleshooting table advises.
Illustration. Follow your model’s instructions.
Check 2
Tap On/Off
A brief press resets the indicator.
Illustration. Follow your model’s instructions.
Check 3
Inspect the contents
Electrolux recommends checking perishables after any outage, since a long one can spoil them.
Illustration. Follow your model’s instructions.
Check 4
Look at Temp
A long outage may also have left the Temp alarm lit.
Still showing Power Failure?
Send us the model and the checks you have done, and open your request here.