Read the whole display
Say which panel you have (the older one has a Power Failure light), then the exact characters shown and whether they flash.
Model-specific code library
Twelve displays are covered across two panel generations: Sb, H°, L°, dE, VAC, SLP and nSL, OF and On, 1A and 2A, Temp, Door Ajar and Power Failure. Most describe a mode or a setting; the temperature and door alerts need a look.
Seeing 1A or 2A where the temperature normally sits means the wine cooler is naming its interior light mode. Nothing has failed. 1A lights the cabinet only while the door is open, and 2A keeps it lit even with the door shut. A 3-second hold on the Light button swaps them.
Read the 1A / 2A checks12 researched wine cooler codes. A code can mean different things on different models, so read your own manual.
Seeing 1A or 2A where the temperature normally sits means the wine cooler is naming its interior light mode. Nothing has failed. 1A lights the cabinet only while the door is open, and 2A keeps it lit even with the door shut. A 3-second hold on the Light button swaps them.
Information onlydE is the demo mode display. A wine cooler left in showroom state alternates dE with On and holds back its alerts. Pressing Cellar Mode and Light together for ten seconds ends it, after which dE and OF alternate before the temperature returns.
Information onlyA flashing Door Ajar indicator on the 2014-style wine cooler panel says the door has stood open, or not quite shut, for over five minutes. The status light drops out and a tone repeats each minute. Close the door or tap On/Off to reset.
Owner checks firstA lit door open icon is the wine cooler telling you the door has been standing open for five minutes or more. Lamps blink and an alarm sounds. Shutting the door ends the situation; touching any key silences the sound while the icon stays lit.
Owner checks firstA blinking alert icon with H° showing is the wine cooler's high temperature warning. The cabinet has run warmer than its set point for six hours. Shut the door, free the front grille, check the bottles and allow time for the cabinet to pull down.
Owner checks firstThe cold-side warning is L° together with a blinking alert icon. The cabinet has stayed cooler than its set point across a six-hour stretch. Nudge the setting warmer and allow a full day before judging the result.
Owner checks firstPressing the mute key makes the display flash OF or On for two seconds. That readout is the key-tone setting, not a message about the cooler. OF silences key presses, On restores them, and alarms keep sounding either way.
Information onlyOn the 2014-style panel, a flashing Power Failure indicator records that the supply was interrupted. The status light is off and, unusually, no tone sounds. A quick press of On/Off clears it, and a brand-new cooler shows it at first start-up too.
Owner checks firstSb is Sabbath mode. The wine cooler keeps cooling, but it has turned off its lamps, most buttons and every door-triggered response. Press the increase and decrease temperature keys together for ten seconds to exit; only the high and low temperature alerts still reach you.
Information onlySLP and nSL are the two settings of the older Electrolux wine cooler's display sleep feature. With SLP the screen goes dark after a minute without a key press; with nSL it stays lit. Hold the Lock key past Loc to toggle between them.
Information onlyTemp flashing on the 2014-style panel means the cabinet ran 10 degrees F above its set point for over an hour, with a tone each minute. Check the door and the bottles, then tap On/Off to reset.
Owner checks firstVAC is vacation mode on the 2014-style panel, and it doubles as Sabbath mode. The cooler keeps cooling at its stored settings while the display, tones and lamps stay off. Hold On/Off until the temperature returns to leave it.
Information only
Twelve displays are covered across two panel generations: Sb, H°, L°, dE, VAC, SLP and nSL, OF and On, 1A and 2A, Temp, Door Ajar and Power Failure. Most describe a mode or a setting; the temperature and door alerts need a look.
We read two Electrolux guides, A16345301 and 242332800, which do not match the older and newer panels point for point. Wine coolers outside those guides may differ.
Say which panel you have (the older one has a Power Failure light), then the exact characters shown and whether they flash.
A warm cabinet puts the bottles at risk long before it puts you at risk, so move the collection if it stays warm. Leave the sealed system and panel wiring alone.
The Electrolux guide gives four reasons for a cabinet that stays warm: a control set warmer than needed, an interior light left on, a front grille with no airflow, or a leaking door gasket. Allow a day after any change.
If the light is out, the guide names a failed LED assembly. If it will not go out with the door closed, the manual light control may be on or the door switch may not be making contact. Check door alignment first.
Follow the guide for your exact model. Consult how we research these pages.
We read two Electrolux guides, A16345301 and 242332800, which do not match the older and newer panels point for point. Wine coolers outside those guides may differ.
Photograph the entire wine-cooler display along with the model label. Note what the appliance was doing as the message came up, and do not lean on an explanation meant for a different appliance.
An older search phrase is no evidence from the maker. If our wine-cooler manuals leave a message unexplained, we keep its name and direct you to help, without guessing a part or a cause.
Open the wine-cooler manuals kept in this library and match the models on their covers to your label. A model that differs has its own operating guide.