What it means
SLP and nSL are the two settings of the older Electrolux wine cooler's display sleep feature. With SLP the screen goes dark after a minute without a key press; with nSL it stays lit. Hold the Lock key past Loc to toggle between them.
Electrolux wine cooler SLP / nSL / Mode, not a failure
SLP and nSL are the two settings of the older Electrolux wine cooler's display sleep feature. With SLP the screen goes dark after a minute without a key press; with nSL it stays lit. Hold the Lock key past Loc to toggle between them.
Also shown as SLP / nSL
SLP and nSL are the two settings of the older Electrolux wine cooler's display sleep feature. With SLP the screen goes dark after a minute without a key press; with nSL it stays lit. Hold the Lock key past Loc to toggle between them.
Press any key.
The panel stays dark and the OK light is also out.
Your checklist, kept on this device

Press any key. The temperature reappears.

Keep pressing until the display reads nSL; that turns sleep off.

Hold Lock past Loc again until SLP appears to bring sleep back.

An alarm condition lights the display even while it sleeps.
Send us the model and the checks you have done, and open your request here.
Book a visitA simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
After 60 seconds without a key press the display goes dark to save power. Only the System Status OK light stays on.
Read the supporting manualnSL. SLP means sleep is enabled again. Both are reached by holding Lock beyond Loc.
Read the supporting manualThe control must be awake before you can switch the unit on or off, change the temperature, adjust the lamp or start vacation mode.
Read the supporting manualManufacturer document
Electrolux (document served from the sister brand's asset library)
June 2014 / PDF p.9 (Operation, Sleep mode)
Electrolux wine cooler with the electronic control and Lock key, guide 242332800 (June 2014).
If the OK light is lit, the cooler is simply asleep.
It only keeps the display on.
It is the display shown when the control lock is released, using the same Lock key.
Sb is the Sabbath display of the 2019 panel; SLP and nSL concern the screen of the 2014 panel.
Codes, symptoms, parts and service
VAC is vacation mode on the 2014-style panel, and it doubles as Sabbath mode. The cooler keeps cooling at its stored settings while the display, tones and lamps stay off. Hold On/Off until the temperature returns to leave it.
The Electrolux guide gives four reasons for a cabinet that stays warm: a control set warmer than needed, an interior light left on, a front grille with no airflow, or a leaking door gasket. Allow a day after any change.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.