Electrolux wine cooler 1A / 2A / Mode, not a failure

Electrolux wine-cooler
error 1A / 2A

Wine-cooler / display reference1A / 2A

Seeing 1A or 2A where the temperature normally sits means the wine cooler is naming its interior light mode. Nothing has failed. 1A lights the cabinet only while the door is open, and 2A keeps it lit even with the door shut. A 3-second hold on the Light button swaps them.

Also shown as 1A / 2A

Last reviewed

Wine-cooler / display reference1A / 2A
Meaning
Seeing 1A or 2A where the temperature normally sits means the wine cooler is naming its interior light mode. Nothing has failed. 1A lights the cabinet only while the door is open, and 2A keeps it lit even with the door shut. A 3-second hold on the Light button swaps them.
Who handles it
Information only
Related codes
Source
Wine Cooler/Beverage Center Use and Care Guide, A16345301

What Electrolux wine cooler 1A / 2A means.

What it means

Seeing 1A or 2A where the temperature normally sits means the wine cooler is naming its interior light mode. Nothing has failed. 1A lights the cabinet only while the door is open, and 2A keeps it lit even with the door shut. A 3-second hold on the Light button swaps them.

What you can safely check

The display borrows the temperature area for a moment to tell you which light mode is active.

When to call a technician

The lamp ignores both modes, or burns on after you chose 1A and shut the door.

Your checklist, kept on this device

Safe checks, in order.

0 of 4 checks done
  1. Electrolux wine cooler 1A / 2A: Wine cooler with a glass door and bottles on wooden racks, a fingertip on a round touch button beside a lit two-digit display.
    Illustration. Follow your model’s instructions.
    Before you begin

    Treat the code as a light label

    The display borrows the temperature area for a moment to tell you which light mode is active. Cooling carries on as normal.

  2. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 2

    Hold the Light button

    Keep it pressed for about three seconds. A quick tap only turns the lamp on or off and leaves the mode alone.

  3. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 3

    Watch the readout settle

    The new code stays up for two seconds, then the set temperature returns.

  4. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 4

    Switch back the same way

    Another long press flips it to the other mode.

Still showing 1A / 2A?

Send us the model and the checks you have done, and open your request here.

Book a visit

Cooling and defrost.

Conceptual Refrigerator sectionEvaporatorEvaporator fanControl panel123
  1. 1Evaporator
  2. 2Evaporator fan
  3. 3Control panel

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Open undercounter wine cooler with a bright LED strip along the top and wine bottles lying on light wood racks

Component reference

Interior light and door switch

The interior light is controlled by the display light key and a door switch.

Read the definition

A little more context.

What is the difference between 1A and 2A?

In 1A the lamp comes on when you open the door and goes dark when you close it. In 2A it stays on whatever the door is doing. Electrolux describes both as ordinary settings.

Read the supporting manual

How do I change the mode?

Keep the Light button pressed until the display changes, which takes about three seconds. Hold it again to reverse the choice.

Read the supporting manual

Why does the light stay lit with the door closed?

You are probably in 2A. A lamp that stays lit after closing is also in the troubleshooting table, which names the manual lamp control and the door switch contact.

Read the supporting manual

The manual behind the message.

Manufacturer document

Wine Cooler/Beverage Center Use and Care Guide, A16345301

Electrolux (document served from the sister brand's asset library)

June 2019 / PDF p.15 (Operation, Lights On/Off and Lights Behavior)

Manufacturer document

Wine Cooler/Beverage Center Use and Care Guide, A16345301

Electrolux (document served from the sister brand's asset library)

June 2019 / PDF p.22 (Troubleshooting)

Electrolux wine cooler panel with the Cellar Mode key, covered by the A16345301 guide (June 2019).

Here to help

Good questions.
Clear answers.

Talk to our team
Does either mode affect how cold the cabinet gets?

The table names a light left on among the reasons a cabinet is not cold enough, so 1A is the safer choice if bottles are running warm.

Should the lamp come on in 1A?

Yes, whenever the door opens. If it stays dark, the table points to a failed LED assembly, which needs a technician.

Does a power cut change the mode?

Electrolux publishes nothing on that. After an outage, hold Light for three seconds and read which code appears.

Where do I change it?

Only on the control panel. No app or remote setting is described.

Let’s take care of it.

Premium appliances deserve
careful service.