Start from the symptom
Electrolux freezer high temperature alarm.
An H or HI alarm means the freezer reached 26 F or warmer, or the fresh food side reached 55 F. Electrolux points first to a door left open, a changed setting or a poor gasket seal. Press Clear Alerts, or unplug for 30 seconds.

Start with safe observations.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Close the doors
The usual cause, per Electrolux, is a door that was not pushed fully shut or stood open for a long while.
- 2
Acknowledge the alarm
Press Clear Alerts. The highest temperature reached is shown when the alarm is first acknowledged.
- 3
Check the settings
Suggested settings for a kitchen install are 37 F in the fresh food side and 0 F in the freezer. Check that nobody moved them.
- 4
Check the gasket seal
Look at the gasket around the doors for a good seal.
- 5
Reset the unit
If the model has no Clear Alerts button, unplug the unit for 30 seconds. If you cannot unplug it, flip the breaker, which resets everything on that circuit.
More about this symptom.
What does H or HI mean on an Electrolux freezer?#
It means the freezer or the refrigerator section went above the alarm threshold, 26 F for the freezer and 55 F for the fresh food side. A door left open is the usual reason.
How do I clear the alarm?#
Press Clear Alerts if your model has it. Otherwise unplug the unit for 30 seconds, or flip the breaker. Check the doors and gasket first, or the alarm comes back.
When does it need a service visit?#
When the alarm repeats with doors shut, settings right and a good seal. A technician will want to know the highest temperature the display showed.
Systems a technician may investigate.
The parts below tie in with this symptom. Seeing it does not prove any one of them has failed.

Freezer airflow vents
The vents let cold air move through the freezer and refrigerator. Electrolux’s frost article says food placed in the line of cold air, or blocking the vents, builds frost. A freezer set colder than the suggested 0°F can also freeze items too hard and bring on frost.

Refrigerator and freezer door gasket
The door gasket is the seal around the doors. Electrolux puts a bent gasket or door at the top of its frost causes, and a leaky seal among the reasons for the H or HI high temperature alarm. Both articles send you to check the seal before anything else.
If the display adds a code.
No code is tied directly to this topic.
No further researched dishwasher code is tied to this topic. Match the exact message to your model manual and do not swap in another code from the library.
See the research statusWhen observation becomes a service request.
Leave internal testing to a technician.
The alarm returns after you close the door and reset.
The freezer stays warm for a day.
The alarm sounds with the doors closed and the gaskets sealed.
The alarm sounds again after a long power cut and does not clear.
Arrange a diagnosticSources and model boundaries.
These sources back the Electrolux freezer high temperature alarm guidance. Use the manual for your own model.
- Refrigerator Error Code H or HI - High Temperature (KB 1917064)
- What do the alarms or error messages mean on my French-Door refrigerator? (KB 1853035)
Follow the guide for your exact model. Consult how we research these pages.
At what temperature does the freezer alarm sound?
The freezer alarm activates at 26 degrees Fahrenheit or above, Electrolux says. The fresh food compartment has its own threshold of 55 degrees Fahrenheit.
How do I stop the alarm sounding?
Press Clear Alerts. Electrolux says the alarm plays every 60 seconds until acknowledged. The alarm can be muted, but the High Temp light stays on until the temperature returns to normal.
What does Door Ajar mean?
A door left open for 5 minutes or more sounds an alarm and lights Door Ajar. Close the door and press Set to clear it. This alarm is separate from High Temp.
What if the alarm follows a power outage?
After a long power cut, High Temp may light or sound until the unit reaches a safe temperature. Acknowledge the Power Failure alarm once power returns and let the unit recover.
Is the food safe after the alarm?
That depends on how warm the freezer got and for how long, and the guide does not say. When in doubt, throw out thawed food that has been above freezing for a long period.
Codes, symptoms, parts and service
Link the message to what to do next.
Electrolux freezer frost build-up
Electrolux explains freezer frost as warm air meeting cold air under 32 F. It names a door or gasket that fails to seal, a chute flap left open, a setting under 0 F and food that blocks airflow.
Refrigerator and freezer door gasket
The door gasket is the seal around the doors. Electrolux puts a bent gasket or door at the top of its frost causes, and a leaky seal among the reasons for the H or HI high temperature alarm. Both articles send you to check the seal before anything else.
Freezer repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.