What it means
On a beverage center, 1A and 2A label the two ways the cabinet lamps can behave. Under 1A they follow the door; under 2A they burn constantly. A long press on the Lights button, about three seconds, switches between the two.
Electrolux beverage center 1A / 2A / Mode, not a failure
On a beverage center, 1A and 2A label the two ways the cabinet lamps can behave. Under 1A they follow the door; under 2A they burn constantly. A long press on the Lights button, about three seconds, switches between the two.
Also shown as 1A / 2A
On a beverage center, 1A and 2A label the two ways the cabinet lamps can behave. Under 1A they follow the door; under 2A they burn constantly. A long press on the Lights button, about three seconds, switches between the two.
The code appears briefly in place of the temperature.
The lamps follow neither setting.
Your checklist, kept on this device

The code appears briefly in place of the temperature. Cooling is untouched.

Press and keep it down for three seconds.

Once you let go, the new code is shown briefly and the temperature returns.

A short press only toggles the lamps.
Send us the model and the checks you have done, and open your request here.
Book a visitA simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
1A. The lamps come on when the door opens and go out when it closes. 2A keeps them on whether the door is open or shut.
Read the supporting manualHold Lights for three seconds and read the code that appears; repeat to go back.
Read the supporting manual2A is the likely reason. Switch to 1A; if the shelves still glow, Electrolux points at the hand-operated lamp control and at the switch that senses the door.
Read the supporting manualManufacturer document
Electrolux (document served from the sister brand's asset library)
June 2019 / PDF p.15 (Operation, Lights On/Off)
Manufacturer document
Electrolux (document served from the sister brand's asset library)
June 2019 / PDF p.22 (Troubleshooting)
Electrolux beverage center panel with the Lights key, A16345301 guide (June 2019).
A lamp that burns all the time shows up in Electrolux's table of reasons for a lukewarm cabinet.
The table names a failed LED assembly, which a technician replaces.
Only the control panel is described.
No. It shows only after the three-second hold.
Codes, symptoms, parts and service
A lit child lock icon means every button on the beverage center is disabled. Nothing is broken. Holding the child lock key down for three seconds locks or unlocks the panel; until then no display setting can be changed.
When a beverage center is too warm, the display blinks HI, the alarm sounds and the high temp indicator flashes. Press mute sounds to silence it. HI stays lit until the unit reaches a safe temperature, which can take 24 hours.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.