Start from the symptom
Electrolux beverage center HI alarm.
When a beverage center is too warm, the display blinks HI, the alarm sounds and the high temp indicator flashes. Press mute sounds to silence it. HI stays lit until the unit reaches a safe temperature, which can take 24 hours.

Start with safe observations.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Silence the alarm
Press mute sounds. It acknowledges the alarm and disables the audible part. Other modes stay off until you acknowledge it.
- 2
Close the door
Check that the door is shut and that the gasket seals.
- 3
Check the temperature setting
Confirm the control is not set warmer than you meant, and let the cabinet settle for a full day after any change.
- 4
Clear the front grille
Airflow to the front grille must not be blocked.
- 5
Look at recent events
A power failure alarm can also leave the high temp alarm lit until a safe temperature is reached.
More about this symptom.
What happens when the HI alarm triggers?#
An audible alarm sounds, the display blinks HI and the high temp indicator flashes. Mute sounds acknowledges it and turns off the sound. All other modes stay off until it is acknowledged.
What causes a beverage center to run warm?#
The troubleshooting table names a warm setting, the light left on, a blocked toe grille and a leaking door seal. Clear those first.
When does HI need a visit?#
When it will not clear after 24 hours despite the checks. Book a technician and say whether a power cut came before it.
Systems a technician may investigate.
The parts below tie in with this symptom. Seeing it does not prove any one of them has failed.

Front grille and airflow
The grille low on the front of the cabinet is the air path for the cooling system. Electrolux says it must stay unobstructed, even when the unit is built in. A blocked grille can make the unit malfunction, and the troubleshooting table names it among the reasons a unit is not cold enough.

Wine cooler door gasket
The door gasket seals the door of a wine cooler or beverage center. Electrolux’s troubleshooting table lists a gasket that is not sealing properly among the reasons for a unit that runs warm, and the remedy printed is to adjust the gasket.
If the display adds a code.
No code is tied directly to this topic.
No further researched dishwasher code is tied to this topic. Match the exact message to your model manual and do not swap in another code from the library.
See the research statusWhen observation becomes a service request.
Leave internal testing to a technician.
HI still shows after 24 hours.
The alarm returns after you acknowledge it.
The unit is warm with the setting colder.
Power returns but the unit does not restart.
Arrange a diagnosticSources and model boundaries.
These sources back the Electrolux beverage center HI alarm guidance. Use the manual for your own model.
- Use & Care Guide, Wine Cooler / Beverage Center (241888400)
Follow the guide for your exact model. Consult how we research these pages.
What does HI mean on my Electrolux beverage center?
The temperature display blinks HI, the alarm sounds and the high temp indicator on the right of the display blinks. It applies to the beverage center only, per Electrolux's guide.
Does pressing mute fix the problem?
No. It acknowledges the alarm and silences the sound. The HI and the high temp indicator stay on until a normal safe operating temperature is reached, then the display shows the real temperature.
Why does HI appear after a power cut?
The power fail alarm can leave the high temp alarm lit until the cabinet has cooled to a safe range. Acknowledge each alarm with mute sounds and let the unit recover.
How long before the temperature settles?
Electrolux asks for a full day of settling time after any adjustment, and a cabinet that stood open or lost power may need all of it.
At what point should I stop troubleshooting?
If HI stays on after 24 hours with the door closed, the gasket sealed and the grille clear. That points to a cooling problem rather than a one-off warm-up.
Codes, symptoms, parts and service
Link the message to what to do next.
Electrolux beverage center HI alarm
When a beverage center is too warm, the display blinks HI, the alarm sounds and the high temp indicator flashes. Press mute sounds to silence it. HI stays lit until the unit reaches a safe temperature, which can take 24 hours.
Front grille and airflow
The grille low on the front of the cabinet is the air path for the cooling system. Electrolux says it must stay unobstructed, even when the unit is built in. A blocked grille can make the unit malfunction, and the troubleshooting table names it among the reasons a unit is not cold enough.
Beverage center repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.