Inside the appliance
Gas burner caps. In plain English.
The burner cap sits on top of the burner head and spreads the flame. Electrolux’s burners-not-lighting article asks you to check that no cap is missing and that each one is seated firmly and rests level on its head.

Where it fits.
Gas burner caps in the appliance
The cap rests on the burner head on top of the cooktop. It lifts straight off for cleaning.
The image shows the type of component only. It does not select a replacement that fits your model.
What is different once this system needs attention.
Gas burner caps concerns may show up with a drop in performance or a code that keeps returning. Testing comes first before anyone decides the component has failed.

Electrolux gas cooktop burner fails to ignite
Check three things first: the knob is turned to the lite position, the burner cap sits level on the burner head, and the ports are free of food. Electrolux says debris in the ports can stop gas flow. A gas odor means nothing gets lit.

Electrolux cooktop element turns on and off
A smooth cooktop element that switches on and off, even on High, is working as designed. Electrolux says the cycling keeps heat steady and protects the glass. It happens more often with a pan smaller than the element or with a bottom that is not flat.
Owner care, within the model instructions.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Check every cap is there
KB 1847383 says no burner cap should be missing.
- 2
Seat each cap level
Each cap has to rest level and firm on its burner head. A cap that rocks or tilts can stop a burner from lighting.
- 3
Check the knob
The surface knob has to be in the lite position when you start.
- 4
Clean the head
If the cap is seated, clean the burner head and slots. Food debris can block the gas flow.
Cleaning or replacement?
Leave internal testing to a technician.
Book a technician if the burner still will not light with the cap level and the head clean.
Book a technician if a cap is cracked, missing or does not fit its head.
Arrange a diagnosticSources and model boundaries.
These sources back the Gas burner caps guidance. Use the manual for your own model.
- Gas Range / Cooktops - Burners are not lighting (KB 1847383)
- Gas Cooktop Ignition Port Cleaning Guide (KB gas cooktop ignition port guide)
Follow the guide for your exact model. Consult how we research these pages.
Can a misplaced cap stop a burner lighting?
Yes. The article asks you to check caps are present, seated firmly and level.
Should the cap be cleaned too?
The article focuses on the head and slots. The ignition guide says to confirm the caps are seated before you cook again.
What else does Electrolux list for burners that will not light?
The surface control knob set to lite, and burner ports that food has clogged.
Does this work for ranges too?
Yes, the article covers gas cooktops and gas ranges.
Codes, symptoms, parts and service
Link the message to what to do next.
Electrolux gas cooktop burner fails to ignite
Check three things first: the knob is turned to the lite position, the burner cap sits level on the burner head, and the ports are free of food. Electrolux says debris in the ports can stop gas flow. A gas odor means nothing gets lit.
Cooktop repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.

