Inside the appliance
Gas cooktop ignition ports. In plain English.
Ignition ports are the small openings in the burner head that carry gas and flame to the igniter. Electrolux says dirty or clogged ports can keep a gas cooktop from igniting, and gives a cleaning method that starts with a soft brush.

Where it fits.
Gas cooktop ignition ports in the appliance
They are on the burner head under the burner cap. The guide mentions slots and holes in the head and the ignition port as separate places to clean.
The image shows the type of component only. It does not select a replacement that fits your model.
What is different once this system needs attention.
Gas cooktop ignition ports concerns may show up with a drop in performance or a code that keeps returning. Testing comes first before anyone decides the component has failed.

Electrolux gas cooktop burner fails to ignite
Check three things first: the knob is turned to the lite position, the burner cap sits level on the burner head, and the ports are free of food. Electrolux says debris in the ports can stop gas flow. A gas odor means nothing gets lit.

Electrolux cooktop element turns on and off
A smooth cooktop element that switches on and off, even on High, is working as designed. Electrolux says the cycling keeps heat steady and protects the glass. It happens more often with a pan smaller than the element or with a bottom that is not flat.
Owner care, within the model instructions.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Soften spills
Apply hot soap and water to burnt-on spills and give them time to soften before wiping. Skip abrasive cleansers, oven cleaner and steel wool near the burner head.
- 2
Brush the burner head
Brush the head and every slot and hole with a soft-bristled brush.
- 3
Clear the ignition port
Clear any blockage from the port with something thin, such as a toothpick or paperclip, or a dedicated port brush.
- 4
Reseat the caps
Before you cook again, make sure every cap sits properly on its burner head.
Cleaning or replacement?
Leave internal testing to a technician.
Book us if a burner still clicks with no flame after the ports are clear and the caps seated.
Book a technician if you smell gas: shut the gas off and leave the area first.
Arrange a diagnosticSources and model boundaries.
These sources back the Gas cooktop ignition ports guidance. Use the manual for your own model.
- Gas Cooktop Ignition Port Cleaning Guide (KB gas cooktop ignition port guide)
- Gas Range / Cooktops - Burners are not lighting (KB 1847383)
Follow the guide for your exact model. Consult how we research these pages.
Why will my gas burner not light?
Electrolux lists the control knob position, the burner cap seating and clogged burner ports. Food debris can block the gas flow.
What should I clean the ports with?
Something thin such as a toothpick or paperclip, or a dedicated port brush, after a soft brush on the head.
Can I use steel wool?
No. The guide warns against abrasive cleansers, oven cleaners and steel wool near the burner head.
Is this only for cooktops?
No. The guide covers gas cooktops and gas ranges.
Codes, symptoms, parts and service
Link the message to what to do next.
Electrolux gas cooktop burner fails to ignite
Check three things first: the knob is turned to the lite position, the burner cap sits level on the burner head, and the ports are free of food. Electrolux says debris in the ports can stop gas flow. A gas odor means nothing gets lit.
Cooktop repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.

