Inside the appliance

Radiant surface element. In plain English.

The radiant element is the heating coil under a smooth ceramic glass cooktop. Electrolux says it is designed to cycle on and off, even on High, and calls that normal. Smaller or uneven pans make it cycle more often.

Last reviewed

Small stainless saucepan on a glowing red radiant element of a black glass cooktop, with a larger frying pan beside it
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Radiant surface element in the appliance

The elements sit under the glass at each cooking area. The indicator lights are usually on the display panel.

The image shows the type of component only. It does not select a replacement that fits your model.

Owner care, within the model instructions.

Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.

  1. 1

    Know cycling is normal

    KB 1847475 says the elements cycle on and off to keep heat steady and protect the cooktop from overheating.

  2. 2

    Match the pan to the element

    A pan smaller than the element makes cycling more frequent, according to the article.

  3. 3

    Check the pan base

    A bottom that is not fully flat also affects how heat transfers.

  4. 4

    Read the indicator lights

    The element-on light shows a surface control is on; the hot-surface light keeps glowing while the glass is still hot (KB 1847370).

Cleaning or replacement?

Leave internal testing to a technician.

Book a technician if an element never heats, or stays on without cycling.

Book a technician if the glass is cracked.

Arrange a diagnostic

Sources and model boundaries.

These sources back the Radiant surface element guidance. Use the manual for your own model.

  • Ranges - Why does my surface element appear to go on and off on my ceramic glass cooktop? (KB 1847475)
  • Ranges - What do the indicator lights on my range mean? (KB 1847370)

Follow the guide for your exact model. Consult how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why does my cooktop element switch on and off?

Electrolux says radiant elements are designed to cycle, even on High, to hold steady heat and avoid overheating.

Does a small pan make it worse?

It can. A pan smaller than the element, or with a base that is not flat, causes more frequent cycling.

What does the hot surface light mean?

It comes on as any cooking area heats up and stays lit until the glass has cooled somewhat.

What is the element on light?

It glows while a surface control is on, so one look after cooking shows whether everything is off.

Let’s take care of it.

Premium appliances deserve
careful service.