Inside the appliance
Ice chute flap. In plain English.
The ice chute flap closes the dispenser chute between uses. Electrolux counts a flap that hangs open as one source of frost. Stuck ice can hold the chute open, so that is the first thing to look for.

Where it fits.
Ice chute flap in the appliance
The flap closes the ice chute on the dispenser in the door. The articles say nothing more specific about its position.
The image shows the type of component only. It does not select a replacement that fits your model.
What is different once this system needs attention.
Ice chute flap concerns may show up with a drop in performance or a code that keeps returning. Testing comes first before anyone decides the component has failed.

Electrolux refrigerator ice maker not working
Little or no ice often comes down to a jam, ice frozen around the auger, a locked display or a water supply problem. Electrolux has a short auger procedure, a DI SP ice-jam article and a no-water checklist that also covers the ice maker.

Electrolux refrigerator or freezer frost buildup
Frost forms when warm and cold air meet below freezing. Electrolux traces it to a gasket or door that cannot seal, a chute flap left ajar, a freezer set colder than 0 degrees F or food blocking the vents.
Owner care, within the model instructions.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Look at the chute
The frost article asks you to see that the chute shuts all the way.
- 2
Remove stuck ice
It adds that a stuck cube can hold the flap open. Take out any cubes you can see.
- 3
Check for a jam alarm
If DI SP is showing, a cube has been in the chute a long time. Clear the chute as KB 1853035 describes.
- 4
Check the door seal too
The same article lists a warped door gasket as a cause of frost. Fix them one at a time.
Cleaning or replacement?
Leave internal testing to a technician.
Book a technician if the flap stays open with the chute empty, or if frost returns after the chute closes.
Arrange a diagnosticSources and model boundaries.
These sources back the Ice chute flap guidance. Use the manual for your own model.
- Refrigerators / Freezer - Frost Build Up (KB 1918348)
- What do the alarms or error messages mean on my French-Door refrigerator? (KB 1853035)
Follow the guide for your exact model. Consult how we research these pages.
Can the chute cause frost in the freezer?
Yes. Electrolux counts a flap that hangs open as one source of frost.
Why will the flap not close?
The article says a stuck cube can hold the chute open.
What does DI SP have to do with it?
DI SP means a cube has been jammed in the chute a long time. Clearing it also helps the flap close.
Can I fix a broken flap myself?
The articles cover only removing stuck ice. A flap that is cracked or will not move after that needs a technician.
Codes, symptoms, parts and service
Link the message to what to do next.
Electrolux freezer frost build-up
Electrolux explains freezer frost as warm air meeting cold air under 32 F. It names a door or gasket that fails to seal, a chute flap left open, a setting under 0 F and food that blocks airflow.
Freezer repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.

