Inside the appliance

Refrigerator control panel and Sabbath mode. In plain English.

Electrolux says that in Sabbath mode (the display shows Sb) neither the lights, the dispenser nor the control panel work, and the mode stays on after a power failure. Turn it off by holding the minus key and the Temp F-C key together for five seconds.

Last reviewed

Hand resting beside the dark display and four square keys of a stainless refrigerator dispenser panel with a water well below
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Refrigerator control panel and Sabbath mode in the appliance

Electrolux’s articles don’t show the panel position. It is the display and keys on the refrigerator, which differ by model.

The image shows the type of component only. It does not select a replacement that fits your model.

Owner care, within the model instructions.

Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.

  1. 1

    Look for Sb

    Sabbath mode turns off portions of the refrigerator and its controls. Electrolux says it must be turned off with the buttons on the control panel.

  2. 2

    Turn Sabbath mode off

    Press and hold the minus key and the Temp F-C key at the same time for five seconds. Electrolux says to check your owner’s manual for models that differ.

  3. 3

    Unlock the display

    Electrolux says a locked display blocks water and ice. Press and hold the lock key for 3 seconds to unlock.

  4. 4

    Acknowledge alarms

    Press Clear Alerts for High Temp. After a power cut, press Alarm Reset when PF appears. Door Ajar follows 5 minutes of an open door: close it and press Set.

  5. 5

    Check the temperature settings

    For a kitchen, Electrolux recommends 37°F for the fresh food section and 0°F for the freezer. Allow 24 hours for the temperature to stabilize after a change.

  6. 6

    Reset the power

    Unplug the refrigerator for 30 seconds, or flip its breaker. Electrolux notes a breaker reset affects everything on that circuit.

Cleaning or replacement?

Leave internal testing to a technician.

For units installed in the past 30 days, Electrolux says to go back to the installer. After 30 days, book a visit if the panel stays dead with Sabbath mode off and the display unlocked.

Electrolux lists SY CF, SY CE, SY EF, OP and SH as codes that may need a technician visit. It gives no meaning for them.

Arrange a diagnostic

Sources and model boundaries.

These sources back the Refrigerator control panel and Sabbath mode guidance. Use the manual for your own model.

  • Refrigerator Error Code SB SB - Sabbath Mode
  • What do the alarms or error messages mean on my French-Door refrigerator? (KB 1853035)
  • Refrigerator Error Code H or HI - High Temperature (KB 1917064)
  • Refrigerators - No Water (KB 1900025)

Follow the guide for your exact model. Consult how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why are my refrigerator lights and dispenser off?

Check for Sb on the display. Electrolux says Sabbath mode disables the lights, the dispenser and the control panel until it is turned off.

Does a power cut end Sabbath mode?

No. Electrolux says the refrigerator stays in Sabbath mode after power returns and must be turned off with the panel buttons.

Does the High Temp alarm work in Sabbath mode?

Yes. Electrolux says it stays active for health reasons, for example if a door is left ajar.

What should I check first for refrigerator control panel and sabbath mode?

Sabbath mode turns off portions of the refrigerator and its controls. Electrolux says it must be turned off with the buttons on the control panel.

Let’s take care of it.

Premium appliances deserve
careful service.