Electrolux dishwasher 01-24 / Mode, not a failure

Electrolux dishwasher
error 01-24

Dishwasher / display reference01-24

A dishwasher displaying 01-24 has a delayed start programmed and is counting down to 0 before the cycle begins. It has not failed. Press Cancel to drop the delay; a second press scraps the cycle and drains, and a third switches the washer off.

Also shown as 01-24

Last reviewed

Dishwasher / display reference01-24
Meaning
A dishwasher displaying 01-24 has a delayed start programmed and is counting down to 0 before the cycle begins. It has not failed. Press Cancel to drop the delay; a second press scraps the cycle and drains, and a third switches the washer off.
Who handles it
No action needed
Related codes
Source
Dishwasher Error Code 01-24 - Delayed option has been activated

What Electrolux dishwasher 01-24 means.

What it means

A dishwasher displaying 01-24 has a delayed start programmed and is counting down to 0 before the cycle begins. It has not failed. Press Cancel to drop the delay; a second press scraps the cycle and drains, and a third switches the washer off.

What you can safely check

The time on the display is the wait before the cycle starts.

When to call a technician

The washer does not react to Cancel, or the countdown never starts the cycle.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux dishwasher 01-24: Two fingers pressing the first two buttons on a stainless dishwasher's top control strip, with a lit display beside them and the open rack behind.
    Illustration. Follow your model’s instructions.
    Before you begin

    Read the display as a countdown

    The time on the display is the wait before the cycle starts. The washer will begin on its own.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Press Cancel once to drop the delay

    The article says to press or hold Cancel to cancel Delay Start.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Know what the second press does

    Pressing Cancel a second time cancels the selected cycle and starts a drain routine.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Know what the third press does

    A third press cancels the drain routine and the unit shuts off.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Note how new the machine is

    Electrolux says a dishwasher fitted in the last month should go back to its installer first.

Still showing 01-24?

Send us the model and the checks you have done, and open your request here.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 1Keypad
  2. 2Control board
  3. 3Motor wiring
  4. 4Heater wiring

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

A little more context.

The washer shows 01-24 and has not started. Why?

A delayed start is active. The cycle begins once the displayed time reaches 0, so the machine is waiting rather than stuck.

Read the supporting manual

How do I cancel the delay?

Press or hold Cancel. Then choose whether to keep the selection or press Cancel again, which cancels the cycle and drains.

Read the supporting manual

Does 01-24 mean 24 hours?

Electrolux does not explain the digits; it describes a programmed delay that counts down to 0.

Read the supporting manual

The manual behind the message.

Manufacturer document

Dishwasher Error Code 01-24 - Delayed option has been activated

Electrolux / Owner Center knowledge base (owner.electrolux.com)

Owner Center article, fetched 10.11.2026 (no edition date printed) / Article text

Electrolux Owner Center article 1830334 (Dishwashers). It does not name a model line.

Here to help

Good questions.
Clear answers.

Talk to our team
Is 01-24 an error code?

No. Electrolux lists it as the delay option having been activated.

Will the washer drain when I cancel?

The second Cancel press starts a drain routine for the selected cycle.

Does 01-24 ever need a repair?

Not by itself. A washer that ignores the Cancel key is the case worth a technician.

Can I just wait it out?

Yes. The cycle starts at 0, so you can leave the washer to run.

Let’s take care of it.

Premium appliances deserve
careful service.