What it means
PF reports that the dishwasher lost power mid-cycle or while waiting. The message is about the interruption, not a failed part. Press START/Cancel to clear it, then begin a new cycle.
Electrolux dishwasher PF / Mode, not a failure
PF reports that the dishwasher lost power mid-cycle or while waiting. The message is about the interruption, not a failed part. Press START/Cancel to clear it, then begin a new cycle.
Also shown as PF
PF reports that the dishwasher lost power mid-cycle or while waiting. The message is about the interruption, not a failed part. Press START/Cancel to clear it, then begin a new cycle.
If the kitchen lost power, wait for it to return before anything else.
PF keeps coming back even with a steady household supply.
Your checklist, kept on this device

If the kitchen lost power, wait for it to return before anything else.

The article says this cancels the error.

With PF cleared, set up the cycle again from the beginning.

Frequent PF suggests a loose plug or a circuit that keeps tripping.
Send us the model and the checks you have done, and open your request here.
Book a visitA simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
There was a loss of power while the dishwasher was running or waiting.
Read the supporting manualPress the START/Cancel button. It cancels the error, and a new cycle can be started.
Read the supporting manualThen the supply is dropping out. Check the plug, the breaker and whether the circuit is shared.
Read the supporting manualManufacturer document
Electrolux / Owner Center knowledge base (owner.electrolux.com)
Owner Center article, fetched 13.11.2026 (no edition date printed) / Article text
Electrolux Owner Center article 1831282 (Dishwashers).
The article does not say that. It names loss of power as the cause.
The interrupted cycle was canceled. Start again.
You do not need to unless you are checking the plug.
Any brief outage can. It is only a message.
Codes, symptoms, parts and service
CL, also printed Cd, tells you the dishwasher door is not closed and latched. Nothing has broken yet. Shove the door fully shut and the code vanishes. A code that clings on with the door shut is a latch matter for a technician.
Flashing lights and display codes on an Electrolux dishwasher are not always a breakdown. A delay countdown (01-24) and a heat delay (Hd or HO) are normal waiting states, while i20 and i40 point to draining and a clogged filter or sump.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.