F13 on an Electrolux oven is a memory problem: the ES630 control's internal checksum may be corrupted, and the modular sheet says data written to memory failed verification. Press any key or reset the power for 30 seconds; if it returns, book a technician.
F13 on an Electrolux oven is a memory problem: the ES630 control's internal checksum may be corrupted, and the modular sheet says data written to memory failed verification. Press any key or reset the power for 30 seconds; if it returns, book a technician.
Service Data Sheet, p/n 807436903, "Appliance with ES630 Electronic Oven Control" (EW30EW65PS)
What Electrolux oven F13 means.
What it means
F13 on an Electrolux oven is a memory problem: the ES630 control's internal checksum may be corrupted, and the modular sheet says data written to memory failed verification. Press any key or reset the power for 30 seconds; if it returns, book a technician.
What you can safely check
The ES630 sheet says to press any key to clear the error first.
When to call a technician
F13 returns at power-up after a 30-second reset.
Your checklist, kept on this device
Safe checks, in order.
0 of 5 checks done
Illustration. Follow your model’s instructions.
Before you begin
Press any key
The ES630 sheet says to press any key to clear the error first.
Illustration. Follow your model’s instructions.
Check 2
Reset the power
Disconnect power, wait 30 seconds and reapply it. Both sheets give this step.
Illustration. Follow your model’s instructions.
Check 3
Watch power-up
If F13 returns at power-up, the fix on both sheets is a new display board or control assembly.
Illustration. Follow your model’s instructions.
Check 4
Note recent power events
The sheets name no cause, but a storm or outage shortly before is useful to mention.
Illustration. Follow your model’s instructions.
Check 5
Book a visit
The ES630 replaces the display board. The modular control replaces the control assembly, the user interface board and touch panel.
Still showing F13?
Send us the model and the checks you have done, and open your request here.
The control's stored data is not reading back correctly. The ES630 sheet says its internal checksum may have become corrupted; the modular sheet says data written to non-volatile memory failed verification.
Press any key, then disconnect power for 30 seconds and reapply. If it returns at power-up, replace the display board (ES630) or the control assembly (modular).