Start from the symptom
Electrolux oven clock, timer or display problems.
The written Electrolux articles say little about setting the clock or timer, since its display-settings guide is a video. What they do cover is a display or keypad that acts up: a stuck key (F11), memory and cable errors (F13, F14, F15), Demo mode and a power reset.

Start with safe observations.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Watch the display settings video
Electrolux's article How to Use Your Wall Oven: Display & Settings (KB 1853574) is a video on the Owner Center. Use it for the clock, timer and clock-format steps for your oven; the written page has no text to quote.
- 2
Reset the power
Electrolux says to unplug the oven for 30 seconds and plug it back in, or flip the breaker at the fuse box. A breaker reset also resets everything else on that circuit.
- 3
Keys that seem stuck
F11 means the control read a key as pressed for too long. On ES630 ovens the sheet says to press any key to clear it. On the modular control it clears when the key is released and Stop is pressed.
- 4
Odd or blank readouts
F13 is a memory error: the ES630 sheet says the control's checksum may be corrupted and to press any key, then power down for 30 seconds. F14 on an ES630 is a misconnected keyboard cable. F15 means different things on the two control families.
- 5
Look for DEMO
If the display says DEMO, the oven is in Demo mode. Electrolux's steps are breaker off, wait 45 seconds, breaker on, then turn demo mode off in the settings menu.
- 6
Note your control family
Electrolux's sheets differ by control family: ES630 ovens and the 2017 modular ovens print different codes, so note which one you have.
Systems a technician may investigate.
The linked parts are the ones Electrolux’s technician sheets name for this appliance. We confirm each against your model number once the diagnostic is done, and you approve any replacement first.

Oven RTD temperature sensor
The RTD is the oven’s temperature probe: a resistance temperature detector that tells the control how hot the cavity is. F30 means the probe circuit reads open and F31 that it reads shorted. On ES630 controls, F10 can also first appear when the probe misreads.

Oven door lock motor
The door lock motor turns the latch that holds the oven door shut during self-clean. Electrolux’s sheets use F90 for a failure of that mechanism, and the modular sheet adds F95 and F97. The owner guide groups F90 to F94 as a door lock issue.

Oven cooling fan
The cooling fan keeps the oven’s outer cabinet from overheating. The ES630 sheet reads its speed through a tachometer: F43 means too slow and F44 too fast. The 2017 modular sheet uses F45 for too low and F46 for too high.

Oven touch panel cable
The touch panel is joined to the display board by two ribbon cables. Electrolux’s ES630 sheet uses F14 for a misconnected keyboard cable there. The 2017 modular sheets print no F14 and use F01 to F05, F28 and F29 for touch panel problems.
If the display adds a code.
Control panel
F11 on an Electrolux oven is a stuck or shorted key: a key was read as pressed for too long, and oven activity ends. Remove anything resting on the keys, press Stop, and if F11 comes back book a technician.
Control board
F13 on an Electrolux oven is a memory problem: the ES630 control's internal checksum may be corrupted, and the modular sheet says data written to memory failed verification. Press any key or reset the power for 30 seconds; if it returns, book a technician.
Control panel
F14 on an Electrolux oven means a misconnected keyboard cable, but only on the ES630 control. The sheet describes two ribbon cables between the display board and the touch panel. Modular ovens print no F14. Book a technician; do not pull the cables yourself.
Control panel
F15 means different things on two Electrolux oven controls. On the ES630 it is a controller self check failure; on the 2017 modular control it is a keyboard error. Reset the power for 30 seconds, then book a technician if F15 returns.
Settings
DEMO on an Electrolux oven is not an error. The Owner Center guide says the oven is in Demo Mode. Turn the breaker off, wait 45 seconds, switch it back on, then find demo mode in the settings menu and turn it off.
Read the related care guide.

F14 or F15 on the oven? Check which control you have.
F14 appears only on the ES630 oven control and means a misconnected keyboard cable. F15 means a failed controller self check on the ES630 but a keyboard error on the 2017 modular control, so your model number decides which row applies. Switch the oven off for 30 seconds, then book a technician if it comes back.

Oven keys or display acting up? Start with lock, demo and a reset.
The Owner Center explains Electrolux oven clock and display settings in video articles with no written steps, so use your Use & Care guide for those. In writing, it covers locked controls, demo mode and a 30-second power reset, and the oven sheets cover keypad codes F11, F13, F14 and F15.
When observation becomes a service request.
Leave internal testing to a technician.
Book a technician if the display stays blank, keys do not answer or F11, F13, F14 or F15 returns after a power reset. Tell us the model number, because the answer depends on the control family.
Arrange a diagnosticSources and model boundaries.
These sources back the Electrolux oven clock, timer or display problems guidance. Use the manual for your own model.
- How to Use Your Wall Oven: Display & Settings (KB 1853574)
- Oven Error Codes and Alarms Guide
- Service Data Sheet, p/n 807436903, "Appliance with ES630 Electronic Oven Control" (EW30EW65PS)
- Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls" (EI30EW38TS)
Follow the guide for your exact model. Consult how we research these pages.
Where do I find the steps to set the oven clock?
Electrolux gives them in a video, How to Use Your Wall Oven: Display & Settings. The written article has no steps, so check your use and care manual too.
How do I reset an Electrolux oven control?
Unplug the oven for 30 seconds and plug it back in, or flip its breaker off and on. Electrolux warns that the breaker also resets other appliances on that circuit.
What does F11 mean?
A key is being read as pressed continuously. The ES630 sheet says it ends all oven activity until cleared. The modular sheet gives a threshold of 30 seconds or more.
Why does DEMO appear on my oven display?
The oven is in Demo mode. Electrolux says to turn off the breaker, wait 45 seconds, turn it on, then switch demo mode off in the settings menu.
Codes, symptoms, parts and service
Link the message to what to do next.
F11
F11 on an Electrolux oven is a stuck or shorted key: a key was read as pressed for too long, and oven activity ends. Remove anything resting on the keys, press Stop, and if F11 comes back book a technician.
Electrolux oven clock, timer or display problems
The written Electrolux articles say little about setting the clock or timer, since its display-settings guide is a video. What they do cover is a display or keypad that acts up: a stuck key (F11), memory and cable errors (F13, F14, F15), Demo mode and a power reset.
Oven repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.