Inside the appliance
Wall oven touch panel (glass touch panel). In plain English.
The touch panel is the glass control surface on a 2017 Electrolux modular wall oven. The service sheet lists it for F01, F02, F04 and F05 as touch panel failures, and for F17, F28 and F29, where the user interface board cannot configure or reach it. The first step is a 30-second power reset.

Where it fits.
Wall oven touch panel (glass touch panel) in the appliance
The glass panel on the front of the oven; the sheet describes its harness to the interface board.
The image shows the type of component only. It does not select a replacement that fits your model.
What is different once this system needs attention.
Wall oven touch panel (glass touch panel) concerns may show up with a drop in performance or a code that keeps returning. Testing comes first before anyone decides the component has failed.

Electrolux oven controls not responding
If the keypad or touch panel ignores you, first rule out the lock: the Electrolux guide says UNLOCK appears after F90 to F94 and the controls stay locked until you follow it. After that, look at stuck-key and panel codes, Demo mode and a power reset.

Electrolux oven light not working
The written Electrolux articles contain no bulb-replacement steps for the oven light. The one relevant code is F23: on ES630 ovens it means the controller could not communicate with the oven lights control board, which is a technician repair.
Owner care, within the model instructions.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Reset the power
Switch the oven off at the breaker, wait 30 seconds and switch it on again.
- 2
Look at the glass
Note whether any part of the panel lights or responds.
- 3
Dry the panel
Wipe moisture off with the oven off and clear anything resting on the glass.
- 4
Do not unplug the panel
The harness carries communication and power from the interface board.
- 5
Write down the code
F01, F02, F04 and F05 share a row on the sheet; F28 and F29 share another. Note the exact one.
Cleaning or replacement?
Leave internal testing to a technician.
F01, F02, F04, F05, F17, F28 or F29 returns after the reset.
The code appears at power-up.
Parts of the panel do not respond.
Arrange a diagnosticSources and model boundaries.
These sources back the Wall oven touch panel (glass touch panel) guidance. Use the manual for your own model.
- Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls"
Follow the guide for your exact model. Consult how we research these pages.
What does F01 mean on an Electrolux oven?
On the modular control, F01, F02, F04 and F05 are touch panel failures. Disconnect power for 30 seconds and reapply it.
What does F28 mean?
Communication between the user interface board and the touch panel cannot be initiated. F29 shares the same row.
Is the touch panel the same as the user interface board?
No. The touch panel is the glass you press. The board behind it reads it and talks to the relay board.
Can I replace the panel myself?
No. The sheet replaces the control assembly, the user interface board and touch panel together. Book a technician.
What about F14?
F14 exists only on the older ES630 control and means a misconnected keyboard cable. Modular ovens print no F14.
Codes, symptoms, parts and service
Link the message to what to do next.
F01-F05
F01, F02, F04 and F05 are touch panel failures on Electrolux's modular wall oven control, and F03 means the user interface board is incorrectly configured. Leave the breaker off for 30 seconds before turning it on again. If the code returns at power-up, book a technician.
Electrolux oven clock, timer or display problems
The written Electrolux articles say little about setting the clock or timer, since its display-settings guide is a video. What they do cover is a display or keypad that acts up: a stuck key (F11), memory and cable errors (F13, F14, F15), Demo mode and a power reset.
Oven repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.

