Electrolux oven F17 / Control panel

Electrolux oven
error F17

Oven / display reference

F17 means the user interface board is unable to configure the touch panel on Electrolux's modular wall oven control. Switch off the breaker for 30 seconds, then switch it back on. If F17 returns, a technician checks the touch panel harness and the control assembly.

Also shown as F17

Last reviewed

Oven / display reference
Meaning
F17 means the user interface board is unable to configure the touch panel on Electrolux's modular wall oven control. Switch off the breaker for 30 seconds, then switch it back on. If F17 returns, a technician checks the touch panel harness and the control assembly.
Who handles it
Technician
Related codes
Source
Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls" (EI30EW38TS)

What Electrolux oven F17 means.

What it means

F17 means the user interface board is unable to configure the touch panel on Electrolux's modular wall oven control. Switch off the breaker for 30 seconds, then switch it back on. If F17 returns, a technician checks the touch panel harness and the control assembly.

What you can safely check

Take the oven off power for half a minute, then reconnect it, as the sheet's first step.

When to call a technician

F17 returns after a 30-second reset.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux oven F17: Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Reset the power

    Take the oven off power for half a minute, then reconnect it, as the sheet's first step.

  2. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 2

    Look at the panel

    Does the glass respond at all? Note whether any part lights.

  3. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 3

    Keep the panel dry

    Wipe moisture off the glass with the power off.

  4. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 4

    Don't open the console

    The harness to the touch panel sits behind it.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    The sheet verifies the harness to the I2C1 or I2C2 connector of the touch panel, then replaces the control assembly.

Still showing F17?

Send us the model and the checks you have done, and open your request here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 2Control board
  2. 3Element wiring

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Thin glass touch panel lying face down beside two flat ribbon cables with white connectors.

Component reference

Oven touch panel cable

The touch panel is joined to the display board by two ribbon cables.

Read the definition
Stainless wall oven control area with two round knobs flanking a dark glass display panel, above the oven door handle

Component reference

Wall oven user interface board (modular control)

The oven user interface board, the UI or UIB, is part of the modular electronic oven control on a 2017 Electrolux wall oven.

Read the definition
Built-in wall oven with a black glass touch panel and dim display above the door, and a folded gray cloth on the counter beside it

Component reference

Wall oven touch panel (glass touch panel)

The touch panel is the glass control surface on a 2017 Electrolux modular wall oven.

Read the definition

A little more context.

What does F17 mean?

The user interface board could not set up the touch panel. The sheet words it as the oven user interface board is unable to configure the touch panel.

Read the supporting manual

What is the sheet's order of steps?

Reset power for 30 seconds; if it returns, verify the harness going to the I2C1 or I2C2 connector of the touch panel; if it persists, replace the control assembly.

Read the supporting manual

How is F17 different from F28?

F28 and F29 say communication with the touch panel cannot be initiated. F17 says the board cannot configure the panel.

Read the supporting manual

The manual behind the message.

Manufacturer document

Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls" (EI30EW38TS)

Electrolux (technician sheet; retailer-hosted copy)

Models: EI30EW38TS

p/n A00980644 Rev A (2017/05) / PDF p.1

Row F17 of the 2017 modular-control sheet, modular oven controls.

Here to help

Good questions.
Clear answers.

Talk to our team
Can a wiring problem cause F17?

Yes. The sheet checks the touch panel harness before the control assembly.

Is F17 shown only at power-up?

The sheet does not say when it appears. Note whether F17 shows at power-up or after you touch the panel, since that detail helps the visit.

Does F17 mean the glass is broken?

The sheet does not say so. It points at configuration and the harness.

Before booking F17, what helps?

For F17, the model number and whether the panel lights or responds.

Let’s take care of it.

Premium appliances deserve
careful service.