Electrolux oven F19 / Control board

Electrolux oven
error F19

Oven / display reference

F19 means the user interface board is unable to configure the oven relay board, on Electrolux's modular wall oven control. Turn the breaker off for half a minute before restoring power. If F19 returns, a technician checks the connection between the two boards and replaces parts in order.

Also shown as F19

Last reviewed

Oven / display reference
Meaning
F19 means the user interface board is unable to configure the oven relay board, on Electrolux's modular wall oven control. Turn the breaker off for half a minute before restoring power. If F19 returns, a technician checks the connection between the two boards and replaces parts in order.
Who handles it
Technician
Related codes
Source
Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls" (EI30EW38TS)

What Electrolux oven F19 means.

What it means

F19 means the user interface board is unable to configure the oven relay board, on Electrolux's modular wall oven control. Turn the breaker off for half a minute before restoring power. If F19 returns, a technician checks the connection between the two boards and replaces parts in order.

What you can safely check

Cut the supply for 30 seconds and bring it back.

When to call a technician

F19 returns after the reset.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux oven F19: Wall oven with its upper trim removed, showing a green control board on a metal bracket with color-coded connectors and an unplugged cord on the counter.
    Illustration. Follow your model’s instructions.
    Before you begin

    Reset the power

    Cut the supply for 30 seconds and bring it back. That is the sheet's first step.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Watch the start-up

    Note whether F19 appears at once or after a function is chosen.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Leave the board connectors

    The link between the boards sits behind the control panel.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Recall repairs

    A relay board that does not match the interface board is one way for configuration to fail.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    The sheet verifies the MACS connection to the relay board, then replaces the control assembly, then the relay board.

Still showing F19?

Send us the model and the checks you have done, and open your request here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 2Control board
  2. 3Element wiring

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Stainless wall oven control area with two round knobs flanking a dark glass display panel, above the oven door handle

Component reference

Wall oven user interface board (modular control)

The oven user interface board, the UI or UIB, is part of the modular electronic oven control on a 2017 Electrolux wall oven.

Read the definition

A little more context.

What does F19 mean?

The interface board tried to set up the relay board and could not. The sheet reads the oven user interface board is unable to configure the oven relay board.

Read the supporting manual

What are the sheet's steps?

Reset power; if the code returns, verify the connection between the user interface board (MACS1 or MACS2) and the relay board (J3 or J4); then replace the control assembly; then the relay board.

Read the supporting manual

How does F19 differ from F22?

F22 is a communication failure after the link existed. F19 is a failure to configure the relay board.

Read the supporting manual

The manual behind the message.

Manufacturer document

Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls" (EI30EW38TS)

Electrolux (technician sheet; retailer-hosted copy)

Models: EI30EW38TS

p/n A00980644 Rev A (2017/05) / PDF p.1

Row F19 of the 2017 modular-control sheet, modular oven controls.

Here to help

Good questions.
Clear answers.

Talk to our team
Is F19 the same as F25?

No. F25 and F27 say communication with the relay board cannot be initiated.

Does F19 mean a new control?

Only after the connection check. The sheet verifies the link between the interface and relay boards first, then replaces the control assembly.

Can wiring be the cause?

Yes, the sheet checks the connection before it replaces anything.

Before booking F19, what helps?

For F19, the model number and any recent control or relay board replacement, since a mismatched board is one way configuration can fail.

Let’s take care of it.

Premium appliances deserve
careful service.