What it means
F18 is an oven relay board failure, which Electrolux's modular wall oven sheet calls the wiggler. The only corrective action listed is to replace the oven relay board. Book a technician; a reset will not fix a failed board.
Electrolux oven F18 / Control board
F18 is an oven relay board failure, which Electrolux's modular wall oven sheet calls the wiggler. The only corrective action listed is to replace the oven relay board. Book a technician; a reset will not fix a failed board.
Also shown as F18
F18 is an oven relay board failure, which Electrolux's modular wall oven sheet calls the wiggler. The only corrective action listed is to replace the oven relay board. Book a technician; a reset will not fix a failed board.
Leave the breaker off for 30 seconds before turning it on again.
F18 appears at all.
Your checklist, kept on this device

Leave the breaker off for 30 seconds before turning it on again. The F18 row lists no reset step, so this only rules out a glitch.

Does it heat, light, or lock the door? Relay board failure can affect any of these.

If the oven heats without control, cut power at the breaker.

It switches the oven's loads at line voltage behind the cabinet.

The sheet's solution is to replace the oven relay board.
Send us the model and the checks you have done, and open your request here.
Book a visit
A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
The oven relay board has failed its own check, which the sheet labels the wiggler.
Read the supporting manualOther rows in this range check wiring or the interface board first. F18 lists a single corrective action: replace the oven relay board.
Read the supporting manualThe sheet describes the modular system as boards that communicate to drive cooking functions: the relay board handles oven functions, working with the user interface.
Read the supporting manualNot until it is repaired. A failed relay board can leave loads switched wrongly.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
Models: EI30EW38TS
p/n A00980644 Rev A (2017/05) / PDF p.1
Row F18 of the 2017 modular-control sheet, modular oven controls.
The sheet uses the word for the relay board's self-test row without explaining it. We do not guess.
Not according to the sheet, which names the oven relay board alone and lists replacing it as the only corrective action for F18.
F19 is the user interface board failing to configure the relay board, which can end with a relay board replacement too.
For F18, the model number and any symptom such as no heat or heat that will not stop.
Codes, symptoms, parts and service
F22 is a communication failure between the oven user interface board and the oven relay board, on Electrolux's modular wall oven control. Leave the oven without power for 30 seconds, then restore it. If F22 returns, book a technician for the harness test.
The written Electrolux articles say little about setting the clock or timer, since its display-settings guide is a video. What they do cover is a display or keypad that acts up: a stuck key (F11), memory and cable errors (F13, F14, F15), Demo mode and a power reset.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.