Electrolux oven F25 / Communication

Electrolux oven
error F25

Oven / display reference

F25 means communication between the user interface and the oven relay board cannot be initiated, on Electrolux's modular wall oven control. The sheet prints it in the same row as F27. Reset power for 30 seconds; if it returns, book a technician.

Also shown as F25

Last reviewed

Oven / display reference
Meaning
F25 means communication between the user interface and the oven relay board cannot be initiated, on Electrolux's modular wall oven control. The sheet prints it in the same row as F27. Reset power for 30 seconds; if it returns, book a technician.
Who handles it
Technician
Related codes
Source
Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls" (EI30EW38TS)

What Electrolux oven F25 means.

What it means

F25 means communication between the user interface and the oven relay board cannot be initiated, on Electrolux's modular wall oven control. The sheet prints it in the same row as F27. Reset power for 30 seconds; if it returns, book a technician.

What you can safely check

Remove power for 30 seconds, then switch it on again, as the sheet's first step.

When to call a technician

F25 appears at power-up after a reset.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux oven F25: Wall oven with its glass control panel hinged forward on arms, a gray ribbon cable into the housing, and the power cord plug lying unplugged on the floor.
    Illustration. Follow your model’s instructions.
    Before you begin

    Reset the power

    Remove power for 30 seconds, then switch it on again, as the sheet's first step.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Note the start-up

    The communication never starts, so F25 usually appears right at power-up.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Leave the connections

    The MACS link between the interface board and the relay board sits behind the control panel. Leave it to a technician.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Remember repairs

    A board that was recently replaced may not be fully seated.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    The sheet verifies the MACS to J3 or J4 connection, then replaces the relay board, then the control assembly.

Still showing F25?

Send us the model and the checks you have done, and open your request here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 2Control board
  2. 3Element wiring

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

A little more context.

What does F25 mean?

The communication between the oven user interface and the oven relay board could not be started. F25 and F27 share one row.

Read the supporting manual

What are the sheet's steps?

Reset power; if the code returns, verify the connection between the interface board (MACS1 or MACS2) and the relay board (J3 or J4); replace the relay board; then replace the control assembly.

Read the supporting manual

The manual behind the message.

Manufacturer document

Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls" (EI30EW38TS)

Electrolux (technician sheet; retailer-hosted copy)

Models: EI30EW38TS

p/n A00980644 Rev A (2017/05) / PDF p.1

Row F25 / F27 of the 2017 modular-control sheet, modular oven controls.

Here to help

Good questions.
Clear answers.

Talk to our team
Why does the sheet list two codes together?

The sheet groups F25 and F27 in a single row with the same description and steps.

Can I use the oven with F25?

Not reliably. The interface board and the relay board are not talking, so the oven cannot switch its elements on command.

Is the relay board replaced before the interface board?

Yes. In the sheet's order for F25 and F27, the relay board is replaced first and the control assembly second.

Before booking F25, what helps?

For F25, the model number and when F25 appears, for example right at power-up or after you select a function.

Let’s take care of it.

Premium appliances deserve
careful service.