What it means
F27 shares its row with F25 on Electrolux's modular wall oven sheet: communication between the user interface and the oven relay board cannot be initiated. Reset power for 30 seconds; if the code returns, book a technician.
Electrolux oven F27 / Communication
F27 shares its row with F25 on Electrolux's modular wall oven sheet: communication between the user interface and the oven relay board cannot be initiated. Reset power for 30 seconds; if the code returns, book a technician.
Also shown as F27
F27 shares its row with F25 on Electrolux's modular wall oven sheet: communication between the user interface and the oven relay board cannot be initiated. Reset power for 30 seconds; if the code returns, book a technician.
Turn the breaker off, count to 30 and switch it on again, then restore it.
F27 returns after a reset.
Your checklist, kept on this device

Turn the breaker off, count to 30 and switch it on again, then restore it.

F27 means the link never started, so it usually shows right after power is restored.

The boards are joined by a cable behind the control panel.

The sheet prints F25 and F27 in a single row, so mention both if you saw them.

Connection check, relay board, then the control assembly.
Send us the model and the checks you have done, and open your request here.
Book a visit
A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
The interface board could not begin communicating with the relay board. The row lists F25 and F27 together under one description.
Read the supporting manualReset power; verify the connection between MACS1 or MACS2 and J3 or J4; replace the relay board; replace the control assembly.
Read the supporting manualOnly by the characters. The sheet gives them the same description and fix.
Read the supporting manualIt stops the oven from working, but it does not by itself signal danger.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
Models: EI30EW38TS
p/n A00980644 Rev A (2017/05) / PDF p.1
Row F25 / F27 of the 2017 modular-control sheet, modular oven controls.
One 30-second reset is enough. If F27 returns, repeated resets will not help.
No. Touch panel communication is F28 and F29. F27 concerns the link between the interface board and the oven relay board.
The ES630 sheets we hold do not list F27. It appears on the modular control sheet, so check your model number first.
For F27, the model number and whether the oven lights or beeps at power-up.
Codes, symptoms, parts and service
F25 means communication between the user interface and the oven relay board cannot be initiated, on Electrolux's modular wall oven control. The sheet prints it in the same row as F27. Reset power for 30 seconds; if it returns, book a technician.
The written Electrolux articles say little about setting the clock or timer, since its display-settings guide is a video. What they do cover is a display or keypad that acts up: a stuck key (F11), memory and cable errors (F13, F14, F15), Demo mode and a power reset.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.