Electrolux oven F22 / Communication

Electrolux oven
error F22

Oven / display reference

F22 is a communication failure between the oven user interface board and the oven relay board, on Electrolux's modular wall oven control. Leave the oven without power for 30 seconds, then restore it. If F22 returns, book a technician for the harness test.

Also shown as F22

Last reviewed

Oven / display reference
Meaning
F22 is a communication failure between the oven user interface board and the oven relay board, on Electrolux's modular wall oven control. Leave the oven without power for 30 seconds, then restore it. If F22 returns, book a technician for the harness test.
Who handles it
Technician
Related codes
Source
Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls" (EI30EW38TS)

What Electrolux oven F22 means.

What it means

F22 is a communication failure between the oven user interface board and the oven relay board, on Electrolux's modular wall oven control. Leave the oven without power for 30 seconds, then restore it. If F22 returns, book a technician for the harness test.

What you can safely check

Disconnect power, wait 30 seconds and reapply it.

When to call a technician

F22 returns after a 30-second reset.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux oven F22: Wall oven with its glass control panel hinged forward on arms, a gray ribbon cable into the housing, and the power cord plug lying unplugged on the floor.
    Illustration. Follow your model’s instructions.
    Before you begin

    Reset the power

    Disconnect power, wait 30 seconds and reapply it. Check whether F22 is still there.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Note when it appears

    Right after a function starts, or at power-up?

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Leave the harness

    The cable between the two boards sits behind the control panel.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Recall repairs

    A recent board swap is useful information.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    The sheet tests the harness between MACS1 or MACS2 and J3 or J4, replaces the relay board, then the control assembly.

Still showing F22?

Send us the model and the checks you have done, and open your request here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 2Control board
  2. 3Element wiring

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Stainless wall oven control area with two round knobs flanking a dark glass display panel, above the oven door handle

Component reference

Wall oven user interface board (modular control)

The oven user interface board, the UI or UIB, is part of the modular electronic oven control on a 2017 Electrolux wall oven.

Read the definition

A little more context.

What does F22 mean?

The two main boards of the modular control have stopped talking. The sheet reads communication failure between the oven user interface board and the oven relay board.

Read the supporting manual

What are the steps?

Reset, then test the wiring harness between the interface board (MACS1 or MACS2) and the relay board (J3 or J4), then replace the relay board if the harness is good, then the control assembly.

Read the supporting manual

How is F22 different from F25 and F27?

F25 and F27 say communication could not be initiated at all. F22 says it failed.

Read the supporting manual

The manual behind the message.

Manufacturer document

Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls" (EI30EW38TS)

Electrolux (technician sheet; retailer-hosted copy)

Models: EI30EW38TS

p/n A00980644 Rev A (2017/05) / PDF p.1

Row F22 of the 2017 modular-control sheet, modular oven controls.

Here to help

Good questions.
Clear answers.

Talk to our team
Can a power reset fix F22?

It can clear a one-time failure, which is why the sheet starts there.

Does F22 mean a bad relay board?

Only after the harness checks out. The sheet tests the cable between the interface board and the relay board first, then replaces the relay board.

Is F22 an ES630 code?

The ES630 sheets we hold do not list F22. It appears on the modular control sheet, so check your model before relying on this page.

Before booking F22, what helps?

For F22, the model number and whether F25 or F27 also appeared, since those rows describe a link that could not start at all.

Let’s take care of it.

Premium appliances deserve
careful service.