F23 is a communication error whose meaning depends on the control. On the ES630 the controller cannot talk to the oven lights control board; on the 2017 modular control the interface board cannot talk to the glass touch panel. Reset power, then book a technician.
F23 is a communication error whose meaning depends on the control. On the ES630 the controller cannot talk to the oven lights control board; on the 2017 modular control the interface board cannot talk to the glass touch panel. Reset power, then book a technician.
Service Data Sheet, p/n 807436903, "Appliance with ES630 Electronic Oven Control" (EW30EW65PS)
What Electrolux oven F23 means.
What it means
F23 is a communication error whose meaning depends on the control. On the ES630 the controller cannot talk to the oven lights control board; on the 2017 modular control the interface board cannot talk to the glass touch panel. Reset power, then book a technician.
What you can safely check
ES630 ovens are the EW30EW55PS, EW30EW65PS and EW30DS80RS.
When to call a technician
F23 returns after a 30-second reset.
Your checklist, kept on this device
Safe checks, in order.
0 of 5 checks done
Illustration. Follow your model’s instructions.
Before you begin
Find your control type
ES630 ovens are the EW30EW55PS, EW30EW65PS and EW30DS80RS. Modular ovens are the EI30EW38TS and EI30EW48TS.
Illustration. Follow your model’s instructions.
Check 2
Reset the power
Unplug it or trip the breaker for 30 seconds, then reconnect. Both sheets start there on modular ovens.
Illustration. Follow your model’s instructions.
Check 3
Check the oven light
On an ES630, a dead oven light alongside F23 fits the lights board link. Note it.
Illustration. Follow your model’s instructions.
Check 4
Check the panel
On a modular oven, note whether the glass touch panel responds.
Illustration. Follow your model’s instructions.
Check 5
Book a visit
ES630: wiring between P2 on the display board and P2 on the lights board, then the lights board, then the display board. Modular: the I2C harness to the panel, the touch panel, then the control assembly.
Still showing F23?
Send us the model and the checks you have done, and open your request here.
The controller failed to communicate with the oven lights control board. The sheet checks the wiring between P2 on the display board and P2 on the oven lights control board.
A communication failure between the oven user interface board and the glass touch panel. The sheet tests the harness between connectors I2C1 or I2C2, then replaces the touch panel.
p/n A00980645 Rev A (2017/05) / PDF p.2 (code table)
Row F23 of the ES630 sheets (807436903, 807436904, 807880710) and the modular sheets (A00980644, A00980645). The two controls word the code differently.