Electrolux oven F20 / Communication

Electrolux oven
error F20

Oven / display reference

F20 means the oven controller has found a problem with the link to the surface element controller (ESEC). It appears on the dual-fuel range sheet. Check whether the surface element displays light; if not, the controller has no power. Then book a technician.

Also shown as F20

Last reviewed

Oven / display reference
Meaning
F20 means the oven controller has found a problem with the link to the surface element controller (ESEC). It appears on the dual-fuel range sheet. Check whether the surface element displays light; if not, the controller has no power. Then book a technician.
Who handles it
Technician
Related codes
Source
Service Data Sheet, p/n 807880710 / 807880711, ES630 (EW30DS80RS dual-fuel range)

What Electrolux oven F20 means.

What it means

F20 means the oven controller has found a problem with the link to the surface element controller (ESEC). It appears on the dual-fuel range sheet. Check whether the surface element displays light; if not, the controller has no power. Then book a technician.

What you can safely check

The sheet's first question is whether the surface element displays show anything.

When to call a technician

The surface displays are dark or F20 returns after a reset.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux oven F20: Wall oven with its glass control panel hinged forward on arms, a gray ribbon cable into the housing, and the power cord plug lying unplugged on the floor.
    Illustration. Follow your model’s instructions.
    Before you begin

    Look at the cooktop displays

    The sheet's first question is whether the surface element displays show anything. If they are dark, the ESEC has no power.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Reset the power

    Turn the range off at the breaker for 30 seconds and restore it.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Try the cooktop

    See whether the surface elements respond once the oven has restarted.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Don't open the front console

    The ESEC power supply board sits in the front console at line voltage.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    The sheet checks 120VAC into the ESEC power supply board, the low voltage supply to the ESEC UIB, the P2 to P9 communication link, then replaces the ESEC UIB, then the oven controller.

Still showing F20?

Send us the model and the checks you have done, and open your request here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 2Control board
  2. 3Element wiring

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

A little more context.

What does F20 mean?

The oven controller cannot communicate with the surface element controller, the ESEC, on the dual-fuel range.

Read the supporting manual

Why does the sheet ask if the surface displays are on?

If the ESEC UIB has no power, the oven control cannot talk to it. Power is the first thing the sheet checks.

Read the supporting manual

What is the communication link?

A wire connection between connector P2 on the oven controller and P9 on the ESEC UIB, checked for continuity.

Read the supporting manual

Does F20 apply to wall ovens?

No. The cooktop link exists only on the dual-fuel range, the EW30DS80RS sheet.

Read the supporting manual

The manual behind the message.

Manufacturer document

Service Data Sheet, p/n 807880710 / 807880711, ES630 (EW30DS80RS dual-fuel range)

Electrolux (technician sheet; retailer-hosted copy)

Models: EW30DS80RS

p/n 807880710 EN (Rev A 16/02); 807880711 FR (Rev A 16/03) / PDF p.1

Row F20 of service data sheet p/n 807880710 / 807880711 for the dual-fuel range EW30DS80RS (ES630 control).

Here to help

Good questions.
Clear answers.

Talk to our team
Can I still use the oven with F20?

The code concerns the cooktop link, so the oven may work, but do not rely on the surface elements.

Is F20 the same as F23?

No. F23 is a communication row inside the oven control. F20 is the cooktop link.

Does a power reset fix F20?

It can clear a glitch. A real power or link problem returns.

Before booking F20, what helps?

For F20, the model number and whether the surface element displays were lit.

Let’s take care of it.

Premium appliances deserve
careful service.