Electrolux oven F28 / Communication

Electrolux oven
error F28

Oven / display reference

F28 means communication between the oven user interface and the touch panel cannot be initiated, on Electrolux's modular wall oven control. The sheet prints it in the same row as F29. Reset power for 30 seconds; if it returns, book a technician.

Also shown as F28

Last reviewed

Oven / display reference
Meaning
F28 means communication between the oven user interface and the touch panel cannot be initiated, on Electrolux's modular wall oven control. The sheet prints it in the same row as F29. Reset power for 30 seconds; if it returns, book a technician.
Who handles it
Technician
Related codes
Source
Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls" (EI30EW38TS)

What Electrolux oven F28 means.

What it means

F28 means communication between the oven user interface and the touch panel cannot be initiated, on Electrolux's modular wall oven control. The sheet prints it in the same row as F29. Reset power for 30 seconds; if it returns, book a technician.

What you can safely check

Take the oven off power for half a minute, then reconnect it.

When to call a technician

F28 returns after a reset.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux oven F28: Wall oven with its glass control panel hinged forward on arms, a gray ribbon cable into the housing, and the power cord plug lying unplugged on the floor.
    Illustration. Follow your model’s instructions.
    Before you begin

    Reset the power

    Take the oven off power for half a minute, then reconnect it.

  2. Ranges & ovens in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Look at the glass

    Does any part of the touch panel light or respond? Note it.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Don't unplug the panel

    The harness at connector I2C1 or I2C2 carries communication and power from the interface board.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Dry the panel

    Wipe any moisture off with the oven off.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    The sheet verifies the touch panel is connected and receiving power from the interface board, then replaces the control assembly.

Still showing F28?

Send us the model and the checks you have done, and open your request here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 2Control board
  2. 3Element wiring

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Thin glass touch panel lying face down beside two flat ribbon cables with white connectors.

Component reference

Oven touch panel cable

The touch panel is joined to the display board by two ribbon cables.

Read the definition
Built-in wall oven with a black glass touch panel and dim display above the door, and a folded gray cloth on the counter beside it

Component reference

Wall oven touch panel (glass touch panel)

The touch panel is the glass control surface on a 2017 Electrolux modular wall oven.

Read the definition

A little more context.

What does F28 mean?

The user interface board could not start talking to the touch panel. F28 and F29 share one description.

Read the supporting manual

What are the steps?

Reset power; verify the touch panel is connected (the harness at I2C1 or I2C2) and getting power from the oven user interface; if the problem persists, replace the control assembly.

Read the supporting manual

How is F28 different from F23?

F23 is a communication failure after the link worked. F28 is one that could not begin.

Read the supporting manual

The manual behind the message.

Manufacturer document

Service Data Sheet, p/n A00980644, "Electric wall ovens with modular oven controls" (EI30EW38TS)

Electrolux (technician sheet; retailer-hosted copy)

Models: EI30EW38TS

p/n A00980644 Rev A (2017/05) / PDF p.1

Row F28 / F29 of the 2017 modular-control sheet, modular oven controls.

Here to help

Good questions.
Clear answers.

Talk to our team
Is F28 the same as F29?

The sheet gives them one description and one fix, so treat them alike.

Can a loose cable cause F28?

Yes, the sheet checks the connection and the power from the interface board.

Can I clear F28 myself?

A power reset is safe and is the sheet's first step. Cable and connector work behind the panel is for a technician.

Before booking F28, what helps?

For F28, the model number and whether the panel lights or responds at all when F28 appears.

Let’s take care of it.

Premium appliances deserve
careful service.