What it means
A range stuck on 5d is in demo mode: it behaves normally, shows 5d constantly and makes no heat. Nothing has failed. Cut power, restore it, then switch the demo parameter off in the settings menu during the first five minutes.
Electrolux range 5d / Mode, not a failure
A range stuck on 5d is in demo mode: it behaves normally, shows 5d constantly and makes no heat. Nothing has failed. Cut power, restore it, then switch the demo parameter off in the settings menu during the first five minutes.
Also shown as 5d
A range stuck on 5d is in demo mode: it behaves normally, shows 5d constantly and makes no heat. Nothing has failed. Cut power, restore it, then switch the demo parameter off in the settings menu during the first five minutes.
In demo mode the oven will not heat even though the range seems to work.
5d will not clear within the 5-minute window.
Your checklist, kept on this device

In demo mode the oven will not heat even though the range seems to work.

The guide says to cut power to the appliance and restore it.

The guide says demo mode can be turned on or off only for the first 5 minutes after power is applied.
Find the demo parameter there and turn it off, then press the temperature knob to leave.
Run a bake to confirm the oven heats.
Send us the model and the checks you have done, and open your request here.
Book a visitA simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
Demo mode is active. The range operates normally except that 5d always shows and no heat is produced.
Read the supporting manualDisconnect and re-connect power, then open the settings menu and disable the demo parameter. You get only the first 5 minutes after power-up.
Read the supporting manualIf 5d is showing, demo mode is the reason. The manual says no heat is produced in this mode.
Read the supporting manualManufacturer document
Electrolux (document served from the sister brand's asset library)
914779590-G-212026 / PDF p.37 (Using the oven, Demo mode)
Electrolux induction range Use & Care Manual 914779590 (English section, pp.2-51).
No. It is a showroom setting.
Yes. Power the range off and on again to open it once more.
The facts come from the induction range manual 914779590.
A menu that refuses the change, or an oven that stays cold afterward, is a technician's job.
Codes, symptoms, parts and service
Err followed by a number on an Electrolux induction range is an error display. The manual says an error was detected and you should write down the code. Reset power for a short while, then book a visit with the number ready.
For a surface element that stays cold, the check depends on the cooktop type. On coil burners, test the safety switch and move the coil to another receptacle. On glass, cut the range's power for 30 seconds. On induction, use cookware a magnet sticks to.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.