What it means
Err followed by a number on an Electrolux induction range is an error display. The manual says an error was detected and you should write down the code. Reset power for a short while, then book a visit with the number ready.
Electrolux range Err / Controls and communication
Err followed by a number on an Electrolux induction range is an error display. The manual says an error was detected and you should write down the code. Reset power for a short while, then book a visit with the number ready.
Also shown as Err
Err followed by a number on an Electrolux induction range is an error display. The manual says an error was detected and you should write down the code. Reset power for a short while, then book a visit with the number ready.
Electrolux asks you to record it, and the digits after Err are what identify the problem.
Err returns after a power reset.
Your checklist, kept on this device

Electrolux asks you to record it, and the digits after Err are what identify the problem.

Trip the breaker, wait briefly, then switch it on again. That step is our own suggestion and does not appear in the manual's row.

See whether Err returns on its own or only when you use a function.
We will want the digits, the model number and the task the range was doing when Err appeared.
Send us the model and the checks you have done, and open your request here.
Book a visitA simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
The manual lists it under oven problems: the control detected a problem, so record the code and call technical support.
Read the supporting manualThe English guide holds a single row for the display and no table of numbers, so the digits matter for the technician.
Read the supporting manualNo. Those are F-codes printed in Electrolux's articles for electric ranges. Err XX is printed in this induction range manual.
Read the supporting manualManufacturer document
Electrolux (document served from the sister brand's asset library)
914779590-G-212026 / PDF p.49 (Before You Call, Oven problems)
Electrolux induction range Use & Care Manual 914779590 (English section).
Cutting power can clear a one-off. If it returns, the number needs a technician.
If the display blocks the oven or cooktop, do not force it; wait for a technician.
The induction range manual 914779590.
Exactly which digits follow Err, plus the model number printed on the range label.
Codes, symptoms, parts and service
A range stuck on 5d is in demo mode: it behaves normally, shows 5d constantly and makes no heat. Nothing has failed. Cut power, restore it, then switch the demo parameter off in the settings menu during the first five minutes.
For a surface element that stays cold, the check depends on the cooktop type. On coil burners, test the safety switch and move the coil to another receptacle. On glass, cut the range's power for 30 seconds. On induction, use cookware a magnet sticks to.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.