Read the whole display
Write down the code exactly as shown, add the model number, and say whether the display stays on or the keys respond.
Model-specific code library
Four range entries are decoded: F40 (Cooktop Lock Out, with F41), F1 (Shorted Key Pad), Err on the induction range, and the 5d demo display. Three of the four start with a short power cycle.
A range stuck on 5d is in demo mode: it behaves normally, shows 5d constantly and makes no heat. Nothing has failed. Cut power, restore it, then switch the demo parameter off in the settings menu during the first five minutes.
Read the 5d checks4 researched range codes. A code can mean different things on different models, so read your own manual.
A range stuck on 5d is in demo mode: it behaves normally, shows 5d constantly and makes no heat. Nothing has failed. Cut power, restore it, then switch the demo parameter off in the settings menu during the first five minutes.
No action neededErr followed by a number on an Electrolux induction range is an error display. The manual says an error was detected and you should write down the code. Reset power for a short while, then book a visit with the number ready.
Owner checks firstThe Electrolux F1 article is headed Shorted Key Pad and gives a single remedy: deprive the range of electricity for at most half a minute with the plug or the breaker. An F1 that outlasts the reset needs a technician.
Owner checks firstElectrolux files F40 under Cooktop Lock Out and covers F41 in the same article. The answer given is a short power cycle, with the range dead for up to 30 seconds. If the code survives it, book a technician.
Owner checks first
Four range entries are decoded: F40 (Cooktop Lock Out, with F41), F1 (Shorted Key Pad), Err on the induction range, and the 5d demo display. Three of the four start with a short power cycle.
The sources are two Owner Center articles, one KB code guide and the induction range Use & Care manual 914779590. Other range codes are not covered here.
Write down the code exactly as shown, add the model number, and say whether the display stays on or the keys respond.
Cut power at the breaker before anything beyond a reset. A code that returns after the reset points to the control or keypad, and that is a job for a technician.
For a surface element that stays cold, the check depends on the cooktop type. On coil burners, test the safety switch and move the coil to another receptacle. On glass, cut the range's power for 30 seconds. On induction, use cookware a magnet sticks to.
If the range door refuses to open, or F90 to F94 shows, Electrolux wants power off for up to half a minute, using the plug or the breaker. First rule out the Lock feature, which also secures the door.
Follow the guide for your exact model. Consult how we research these pages.
The sources are two Owner Center articles, one KB code guide and the induction range Use & Care manual 914779590. Other range codes are not covered here.
Photograph the entire range display along with the model label. Note what the appliance was doing as the message came up, and do not lean on an explanation meant for a different appliance.
An older search phrase is no evidence from the maker. If our range manuals leave a message unexplained, we keep its name and direct you to help, without guessing a part or a cause.
Open the range manuals kept in this library and match the models on their covers to your label. A model that differs has its own operating guide.