Inside the appliance
Induction cooking zone. In plain English.
An induction cooking zone heats the pan itself, so the cookware has to be right. Electrolux says to use quality heavy-gauge cookware and hold a magnet to the underside of the pan. If it clings, the material suits induction.

Where it fits.
Induction cooking zone in the appliance
The zones are the marked cooking areas on the glass top of an induction range or cooktop.
The image shows the type of component only. It does not select a replacement that fits your model.
What is different once this system needs attention.
Induction cooking zone concerns may show up with a drop in performance or a code that keeps returning. Testing comes first before anyone decides the component has failed.

Electrolux gas cooktop burner fails to ignite
Check three things first: the knob is turned to the lite position, the burner cap sits level on the burner head, and the ports are free of food. Electrolux says debris in the ports can stop gas flow. A gas odor means nothing gets lit.

Electrolux cooktop element turns on and off
A smooth cooktop element that switches on and off, even on High, is working as designed. Electrolux says the cycling keeps heat steady and protects the glass. It happens more often with a pan smaller than the element or with a bottom that is not flat.
Owner care, within the model instructions.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Do the magnet test
KB 1847372 says a magnet that clings to the underside of the pan shows the material is suitable. Not all stainless steel is magnetic.
- 2
Choose heavy-gauge pans
Stainless steel is generally excellent. Cast iron is good and cooks evenly.
- 3
Protect the glass
Do not slide cast iron on the cooktop. A rough cast iron base, or a rough enamel coating, scratches the ceramic surface.
- 4
Check the manual
For more on cookware, the article sends you to the owner’s manual for your range.
Cleaning or replacement?
Leave internal testing to a technician.
Book us if a zone stays cold even with magnetic cookware sitting flat on it.
Book us if the glass has cracked or a control does not answer.
Arrange a diagnosticSources and model boundaries.
These sources back the Induction cooking zone guidance. Use the manual for your own model.
- Ranges - What type of cookware do I use with Induction? (KB 1847372)
Follow the guide for your exact model. Consult how we research these pages.
How do I know my pan works on induction?
Try a magnet on the underside of the pan. If it clings, Electrolux says the base material is suitable.
Is all stainless steel okay?
Not necessarily. The article notes that not all stainless steel is magnetic.
Can cast iron scratch the cooktop?
Yes. Rough cast iron scratches ceramic glass, and you should not slide it.
What about enamel-coated pans?
Heating varies with the base material, and the coating must be smooth to avoid scratching.
Codes, symptoms, parts and service
Link the message to what to do next.
Electrolux range surface burner not heating
For a surface element that stays cold, the check depends on the cooktop type. On coil burners, test the safety switch and move the coil to another receptacle. On glass, cut the range's power for 30 seconds. On induction, use cookware a magnet sticks to.
Range repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.

