Start from the symptom

Electrolux refrigerator controls not responding.

A refrigerator whose panel, lights and dispenser all seem dead may simply be in Sabbath mode, which shows SB. Electrolux says the mode survives a power failure and must be switched off from the control panel. A locked display is the other common cause.

Last reviewed

Fingertip on a touch pad below a lit two-digit display on a stainless refrigerator door with colorful geometric magnets.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.

  1. 1

    Look for SB

    With Sabbath mode on, the display reads Sb and the panel, the dispenser and the lights are all out of action. The mode survives a power cut.

  2. 2

    Turn Sabbath mode off

    Hold the minus key and the Temp F-C key down together for five seconds. Check your owner's manual for models with different keys.

  3. 3

    Unlock the display

    A locked display blocks water and ice. Press the lock key and keep it down for three seconds.

  4. 4

    Silence an alert

    Press Clear Alerts or Set to acknowledge. Close the doors first, since Door Ajar and High Temp alarms follow open doors.

  5. 5

    Power reset

    Unplug the refrigerator for 30 seconds, or flip its breaker. A breaker reset affects everything on that circuit.

  6. 6

    After an outage

    Press Alarm Reset when PF appears. High Temp may remain until the unit reaches a safe temperature.

If the display adds a code.

Keep the exact message.

We have not researched the code meanings for this appliance. Turn to its model manual and attach a photo of the display to your request.

See the research status

When observation becomes a service request.

Leave internal testing to a technician.

Book a visit if the panel stays unresponsive after Sabbath mode is off, the display is unlocked and the power has been reset. Say what the display shows, if anything.

Arrange a diagnostic

Sources and model boundaries.

These sources back the Electrolux refrigerator controls not responding guidance. Use the manual for your own model.

  • Refrigerator Error Code SB SB - Sabbath Mode
  • What do the alarms or error messages mean on my French-Door refrigerator? (KB 1853035)
  • Refrigerators - No Water (KB 1900025)

Follow the guide for your exact model. Consult how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why are my refrigerator lights and dispenser off?

Check for SB on the display. In Sabbath mode, Electrolux says the lights, the dispenser and the panel stay out of action until you deactivate it.

How do I turn Sabbath mode off?

Keep the minus key and Temp F-C pressed together for five seconds. Power loss does not cancel it, so switch it off at the panel.

Will unplugging cancel Sabbath mode?

No. Electrolux says the refrigerator stays in Sabbath mode after power failure recovery. Deactivate it with the control panel buttons.

Is the High Temp alarm active in Sabbath mode?

Yes, for health reasons. If a door is ajar the alarm sounds, and the refrigerator works normally once the door is closed.

Let’s take care of it.

Premium appliances deserve
careful service.