Start from the symptom

Electrolux refrigerator freezer not freezing or fridge too warm.

If the freezer or refrigerator warms up, check first for an open door, a changed temperature setting or a poor door seal. The H or HI alarm is set at 26 F for the freezer and 55 F for the fresh food side.

Last reviewed

An open freezer compartment with a tub of softened ice cream, a milk carton and a small dial thermometer on a wire shelf.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.

  1. 1

    What H or HI means

    The High Temp alarm sounds once the freezer climbs to 26 F or the fresh food section to 55 F, Electrolux says. A door left open is the usual trigger.

  2. 2

    Close the doors

    If the door has been open for 5 minutes or more, an alarm sounds and Door Ajar lights up. Close the door and press the Set key to reset the alarm.

  3. 3

    Check the settings

    Electrolux's kitchen recommendation is a 37 F fresh food section and a 0 F freezer. A changed setting can raise the temperature.

  4. 4

    Inspect the gasket

    A door seal that is not tight lets warm air in. Check the gasket around each door.

  5. 5

    Clear the alarm

    Press Clear Alerts, unplug the refrigerator for 30 seconds, or flip its breaker. Electrolux says breaker resets affect everything on the circuit.

  6. 6

    After a power failure

    PF shows after an outage. Press Alarm Reset once power returns. The High Temp alarm may stay on until the refrigerator reaches a safe temperature.

  7. 7

    Service codes

    The codes SY CF, SY CE and SY EF, plus OP and SH, come with only a note that service could be needed. No meanings are printed.

When observation becomes a service request.

Leave internal testing to a technician.

Book a technician if the freezer or refrigerator stays warm after the doors, seals, settings and reset are checked, or if an SY code appears. Check food for safety if it has been warm for a long time.

Arrange a diagnostic

Sources and model boundaries.

These sources back the Electrolux freezer not freezing or fridge too warm guidance. Use the manual for your own model.

  • Refrigerator Error Code H or HI - High Temperature (KB 1917064)
  • What do the alarms or error messages mean on my French-Door refrigerator? (KB 1853035)

Follow the guide for your exact model. Consult how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What temperatures trigger the H or HI alarm?

A freezer at 26 F or above, or a fresh food section at 55 F or above, Electrolux says. An open door is the usual cause.

How do I silence the alarm?

Press Clear Alerts to acknowledge it. Electrolux notes the High Temp icon stays lit until the temperature returns to normal.

What do SY CF, SY CE and SY EF mean?

Electrolux lists them with SH and OP but gives no meaning. It says service may be required, so record the code and book a visit.

Does a power outage cause these alarms?

Yes. PF means power failure, and High Temp can stay on afterward. Acknowledge PF with Alarm Reset once power returns.

Let’s take care of it.

Premium appliances deserve
careful service.