Start from the symptom
Electrolux refrigerator light not working.
Electrolux's written articles have no bulb replacement guide. What they do say is that in Sabbath mode the lights do not work, and a power failure leaves the unit in that mode. Check for SB before anything else.

Start with safe observations.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Look for Sb
Sabbath mode switches off the lamps, the dispenser and the panel.
- 2
Turn it off
Press the minus key and the Temp F-C key together and hold for five seconds. A power cut does not end the mode.
- 3
Power
If nothing else is on either, check that the refrigerator has power at the outlet and breaker.
- 4
Reset
Unplug it for 30 seconds or flip the breaker, which affects everything on that circuit.
- 5
Bulb details
Check your owner's manual for the bulb type and whether it is user-replaceable. Electrolux's cached articles do not describe it.
Systems a technician may investigate.
The parts below tie in with this symptom. Seeing it does not prove any one of them has failed.
If the display adds a code.
Keep the exact message.
We have not researched the code meanings for this appliance. Turn to its model manual and attach a photo of the display to your request.
See the research statusRead the related care guide.

Frost in the freezer? Four things to check.
Electrolux describes frost as condensation that freezes where warm air meets air below 32 °F. Check four things: the door and gasket seal, the chute flap, a freezer setting that has drifted below zero, and food sitting across the vents. Book if frost returns.

High Temp on the fridge display? Start with the door and the gasket.
Most Electrolux refrigerator alarms are prompts: PF after a power cut, High Temp when a section passes 26 degrees (freezer) or 55 degrees (fridge), Door Ajar after 5 minutes open, Sb for Sabbath mode and DI SP for an ice jam. OP, SH, SY CE, SY CF and SY EF have no printed meaning.
When observation becomes a service request.
Leave internal testing to a technician.
Should the light remain off with Sabbath mode cleared and power confirmed, book a visit. Tell us whether the dispenser and control panel still work.
Arrange a diagnosticSources and model boundaries.
These sources back the Electrolux refrigerator light not working guidance. Use the manual for your own model.
- Refrigerator Error Code SB SB - Sabbath Mode
- What do the alarms or error messages mean on my French-Door refrigerator? (KB 1853035)
Follow the guide for your exact model. Consult how we research these pages.
Why are my refrigerator lights off but the unit is cold?
It may be in Sabbath mode, which disables the lights, dispenser and panel. The display shows Sb. Turn it off from the control panel.
How do I replace the bulb?
Electrolux's written articles do not cover it. Use your owner's manual for the bulb type and steps, and unplug the unit first.
Does Sabbath mode end after a power outage?
No. The refrigerator stays in Sabbath mode after power returns, so it must be deactivated with the control panel buttons.
Will a reset restore the light?
A reset helps if the light problem comes from a control glitch. It will not turn Sabbath mode off, so do that first.
Codes, symptoms, parts and service
Link the message to what to do next.
Electrolux refrigerator ice maker not working
Little or no ice often comes down to a jam, ice frozen around the auger, a locked display or a water supply problem. Electrolux has a short auger procedure, a DI SP ice-jam article and a no-water checklist that also covers the ice maker.
Refrigerator control panel and Sabbath mode
Electrolux says that in Sabbath mode (the display shows Sb) neither the lights, the dispenser nor the control panel work, and the mode stays on after a power failure. Turn it off by holding the minus key and the Temp F-C key together for five seconds.
Refrigerator repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.
