Electrolux dryer EA3 / Power supply

Electrolux dryer
error EA3

Dryer / display referenceEA3

EA3 means the line voltage is too low, per Electrolux's dryer chart. The conditions are low line voltage or a faulty control board, and the chart's step is to check the amplitude of the line voltage. Do not use an extension cord; book a technician.

Also shown as EA3

Last reviewed

Dryer / display referenceEA3
Meaning
EA3 means the line voltage is too low, per Electrolux's dryer chart. The conditions are low line voltage or a faulty control board, and the chart's step is to check the amplitude of the line voltage. Do not use an extension cord; book a technician.
Who handles it
Model-dependent / read first
Related codes
Source
Dryer Tech Data Sheet, P/N 137265000B (1202)

What Electrolux dryer EA3 means.

What it means

EA3 means the line voltage is too low, per Electrolux's dryer chart. The conditions are low line voltage or a faulty control board, and the chart's step is to check the amplitude of the line voltage. Do not use an extension cord; book a technician.

What you can safely check

Electrolux's dryer articles say not to use one.

When to call a technician

EA3 returns with no extension cord and tripped breakers reset.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux dryer EA3: Hand gripping a heavy black dryer cord plug seated in a steel-plated wall receptacle, with a closed gray breaker panel on the wall behind.
    Illustration. Follow your model’s instructions.
    Before you begin

    Remove any extension cord

    Electrolux's dryer articles say not to use one. It lowers the voltage reaching the dryer. [2]

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check the breakers

    An electric dryer uses two breakers or fuses. A tripped one can starve it of power. [2]

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Check the plug

    A loose plug is a cause of low voltage at the dryer.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Recall the stored error

    Wake with any button except Cancel and hold Cancel and Start/Pause for 6 seconds.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    The chart checks the amplitude of the line voltage.

Still showing EA3?

Send us the model and the checks you have done, and open your request here.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 3Drum

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Front-load dryer control console with a steel dial, lit bar and dot indicators, and a row of five buttons above the round glass door

Component reference

Dryer electronic control board and interface board

The dryer electronic control board is the main board of an Electrolux front-load dryer, and the interface board is the console board that talks to it.

Read the definition

A little more context.

What causes low voltage?

The chart lists line voltage too low or a faulty control board. Electrolux's long-drying article adds that a 208-volt supply instead of 240 volts can lengthen drying times.

Read the supporting manual

The manual behind the message.

Manufacturer document

Dryer Tech Data Sheet, P/N 137265000B (1202)

Electrolux (technician sheet; retailer-hosted copy)

P/N 137265000B (1202); Canadian SKU EIMED6CJIW; original file dated 2009 / sheet p.2 (Error Code Chart)

Manufacturer document

Dryer - Not Drying and Extended Drying Time (KB 1853008)

Electrolux / Owner Center knowledge base (owner.electrolux.com)

Owner Center article, cached 10.11.2026 (no edition date printed) / article text

Row EA3 of the dryer chart, page 2, plus Electrolux's long-drying article (KB 1853008).

Here to help

Good questions.
Clear answers.

Talk to our team
Could a 208-volt supply cause EA3?

Electrolux says 208 volts can increase drying times and wants 240 volts. It does not link 208 volts to EA3.

Can a loose wire cause EA3?

A loose connection at the outlet or terminal block can drop voltage.

Is it a dryer problem?

The chart lists the control board as the other condition, so it can be.

Before booking EA3, what helps?

For EA3, the model, the outlet type and whether an extension cord is in use.

Let’s take care of it.

Premium appliances deserve
careful service.