Inside the appliance
Dryer electronic control board and interface board. In plain English.
The dryer electronic control board is the main board of an Electrolux front-load dryer, and the interface board is the console board that talks to it. Electrolux's dryer chart names the control board for E54, E67, E94, E97 and EA5, and the pair for E91 to E93. Owners can restart the dryer once; board work is for a technician.

Where it fits.
Dryer electronic control board and interface board in the appliance
Behind the console and inside the cabinet; the dryer chart does not locate either board.
The image shows the type of component only. It does not select a replacement that fits your model.
What is different once this system needs attention.
Dryer electronic control board and interface board concerns may show up with a drop in performance or a code that keeps returning. Testing comes first before anyone decides the component has failed.
Owner care, within the model instructions.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Restart once
Unplug the dryer for a minute and plug it back in. A single communication problem may clear.
- 2
Test the keys
Press the buttons one at a time and see whether the display answers each one. Note which ones do not.
- 3
Keep the console dry
Wipe moisture off the panel with the dryer unplugged.
- 4
Read the stored error
Wake the dryer with any button but Cancel, then hold Cancel and Start/Pause together for 6 seconds to show the last error.
- 5
Mention recent repairs
E92 and E93 name an interface board or console that does not match the control board. Say so if a board was replaced.
Cleaning or replacement?
Leave internal testing to a technician.
E91, E92, E93, E94 or E97 returns after one restart.
The display is blank or keys do not respond.
Line voltage codes EA1 to EA5 appear with other appliances behaving oddly.
Arrange a diagnosticSources and model boundaries.
These sources back the Dryer electronic control board and interface board guidance. Use the manual for your own model.
- Dryer Tech Data Sheet, P/N 137265000B (1202)
Follow the guide for your exact model. Consult how we research these pages.
What does E91 mean on an Electrolux dryer?
It is a communication error between the control board and the interface board. The chart lists the wiring, the control board or the interface board.
What is the interface board?
It is the console board that connects the keys and display to the electronic control board. The chart names it for E91, E92 and E93.
Can a wrong board cause a code?
Yes. E92 is an incompatible protocol and E93 and E94 are configuration errors. The chart says to check the correct boards and console are fitted.
Can I replace the board myself?
We do not recommend it. The chart's fix is replacing a board, and the dryer runs on household power. Unplug the dryer and book a technician.
Is EA2 always the control board?
No. EA2 means high line voltage or a faulty control board. The chart checks the incoming voltage first.
Codes, symptoms, parts and service
Link the message to what to do next.
E91
E91 is a communication error between the dryer's control board and its interface board, per Electrolux's dryer chart. The cause is the wiring, the control board or the interface board. Restart once, then book a technician.
Electrolux dryer noisy, rattling or shaking
Most dryer noise has a simple source: coins or buckles in the drum, a loose pedestal, shipping bolts still in place or a dryer that is out of level. Electrolux also lists sounds that are normal, such as the chime at the end of a cycle.
Dryer repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.

