Electrolux dryer E92 / Control board

Electrolux dryer
error E92

Dryer / display reference

E92 means the dryer's control board and interface board use incompatible protocols, per Electrolux's dryer chart. The solution is to check that the correct interface board and console are fitted and replace the wrong hardware. Book a technician.

Also shown as E92

Last reviewed

Dryer / display reference
Meaning
E92 means the dryer's control board and interface board use incompatible protocols, per Electrolux's dryer chart. The solution is to check that the correct interface board and console are fitted and replace the wrong hardware. Book a technician.
Who handles it
Technician
Related codes
Source
Dryer Tech Data Sheet, P/N 137265000B (1202)

What Electrolux dryer E92 means.

What it means

E92 means the dryer's control board and interface board use incompatible protocols, per Electrolux's dryer chart. The solution is to check that the correct interface board and console are fitted and replace the wrong hardware. Book a technician.

What you can safely check

E92 fits a board or console that was swapped for the wrong one.

When to call a technician

E92 appears after any repair or panel replacement.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux dryer E92: Dryer console hinged open to show a green control board with wire connectors, the unplugged power cord and a screwdriver lying on the dryer top.
    Illustration. Follow your model’s instructions.
    Before you begin

    Recall recent repairs

    E92 fits a board or console that was swapped for the wrong one. Tell us about any recent work.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Restart once

    Unplug for a minute and plug in. A real mismatch will return.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Don't swap parts yourself

    Moving a console from another dryer is a common way to produce this code.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Note the model number

    Boards are matched to the model. The label inside the door shows it.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    The chart checks that the correct interface board and control board are installed and replaces the appropriate hardware.

Still showing E92?

Send us the model and the checks you have done, and open your request here.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 3Drum

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Front-load dryer control console with a steel dial, lit bar and dot indicators, and a row of five buttons above the round glass door

Component reference

Dryer electronic control board and interface board

The dryer electronic control board is the main board of an Electrolux front-load dryer, and the interface board is the console board that talks to it.

Read the definition

A little more context.

What does E92 mean?

The electronic control board is incompatible with the interface board. The chart calls it incompatible protocol.

Read the supporting manual

How does E92 happen?

The chart lists the cause as an incompatible control board and interface board. In practice that means a part that does not belong to this model.

Read the supporting manual

What is the fix?

Confirm the correct interface board and console are in place, and replace the hardware that is wrong.

Read the supporting manual

The manual behind the message.

Manufacturer document

Dryer Tech Data Sheet, P/N 137265000B (1202)

Electrolux (technician sheet; retailer-hosted copy)

P/N 137265000B (1202); Canadian SKU EIMED6CJIW; original file dated 2009 / sheet p.2 (Error Code Chart)

Row E92 of the dryer chart, page 2.

Here to help

Good questions.
Clear answers.

Talk to our team
Can a DIY panel swap cause E92?

Yes, a panel from a different model is the plain cause. We would not swap it ourselves.

Is E92 the same as E91?

No. E91 is a communication loss between boards that should match. E92 means they do not match.

Does a reset help?

Only if the board pair is correct and the code was a one-off. A real protocol mismatch returns as soon as the dryer powers up.

What helps the visit?

The model number and any history of control board, interface board or console replacement on this dryer.

Let’s take care of it.

Premium appliances deserve
careful service.