What it means
E91 is a communication error between the dryer's control board and its interface board, per Electrolux's dryer chart. The cause is the wiring, the control board or the interface board. Restart once, then book a technician.
Electrolux dryer E91 / Control board
E91 is a communication error between the dryer's control board and its interface board, per Electrolux's dryer chart. The cause is the wiring, the control board or the interface board. Restart once, then book a technician.
Also shown as E91
E91 is a communication error between the dryer's control board and its interface board, per Electrolux's dryer chart. The cause is the wiring, the control board or the interface board. Restart once, then book a technician.
Unplug for a minute and plug it back in.
E91 returns after a restart or the buttons stop answering.
Your checklist, kept on this device

Unplug for a minute and plug it back in. A single communication hiccup may clear.

Press the buttons one at a time and see whether the display answers each one.

Moisture on the panel can disturb the interface. Wipe it dry with the dryer unplugged.

Tap any button other than Cancel to wake the dryer, then keep Cancel and Start/Pause pressed together for six seconds.

The chart checks the connections between the control board and the interface board, then replaces either board.
Send us the model and the checks you have done, and open your request here.
Book a visitA simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
The dryer electronic control board is the main board of an Electrolux front-load dryer, and the interface board is the console board that talks to it.
Read the definitionThe two boards that run the dryer cannot talk to each other. The chart reads communication error and lists wiring, the electronic control board or the interface board as defective.
Read the supporting manualCheck the connections between the control board and the interface board. If the wiring is fine, replace the control board or the interface board.
Read the supporting manualE92 means the boards are incompatible, so the right boards are checked. E91 means they are the right pair that fail to communicate.
Read the supporting manualProbably not. With the boards out of contact, starting and selecting cycles is unreliable.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
P/N 137265000B (1202); Canadian SKU EIMED6CJIW; original file dated 2009 / sheet p.2 (Error Code Chart)
Row E91 of the dryer chart, page 2. Board-to-board communication.
It can be. The chart checks the connections first, before it replaces any board.
It might for a short time. A real communication problem returns.
No. The chart gives no age or wear cause for E91. It lists wiring, the control board or the interface board as the possible conditions.
For E91, the model, the exact code and whether any display or button still works.
Codes, symptoms, parts and service
E92 means the dryer's control board and interface board use incompatible protocols, per Electrolux's dryer chart. The solution is to check that the correct interface board and console are fitted and replace the wrong hardware. Book a technician.
Most dryer noise has a simple source: coins or buckles in the drum, a loose pedestal, shipping bolts still in place or a dryer that is out of level. Electrolux also lists sounds that are normal, such as the chime at the end of a cycle.
The dryer electronic control board is the main board of an Electrolux front-load dryer, and the interface board is the console board that talks to it. Electrolux's dryer chart names the control board for E54, E67, E94, E97 and EA5, and the pair for E91 to E93. Owners can restart the dryer once; board work is for a technician.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.