What it means
E97 is a program mismatch on Electrolux's dryer chart: the wrong configuration data was loaded or the electronic control board is defective. The solution is to replace the control board. Book a technician.
Electrolux dryer E97 / Control board
E97 is a program mismatch on Electrolux's dryer chart: the wrong configuration data was loaded or the electronic control board is defective. The solution is to replace the control board. Book a technician.
Also shown as E97
E97 is a program mismatch on Electrolux's dryer chart: the wrong configuration data was loaded or the electronic control board is defective. The solution is to replace the control board. Book a technician.
Unplug for a minute, then plug in.
E97 returns.
Your checklist, kept on this device

Unplug for a minute, then plug in. A mismatch that persists will return.

A board for a different dryer model is the plain explanation.

There is no owner step to reprogram the control. The fix on the chart is a replacement control board.

It tells the technician which data the board should hold.

The chart replaces the electronic control board.
Send us the model and the checks you have done, and open your request here.
Book a visitA simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
The dryer electronic control board is the main board of an Electrolux front-load dryer, and the interface board is the console board that talks to it.
Read the definitionThe program in the control does not match the dryer. The chart words it program mismatch.
Read the supporting manualReplace the electronic control board, since the chart lists wrong data loaded or a defective board.
Read the supporting manualE94 is a checksum error in the cycle data; E97 is the program not matching. Both replace the board.
Read the supporting manualProbably not. The control cannot match its program to the machine.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
P/N 137265000B (1202); Canadian SKU EIMED6CJIW; original file dated 2009 / sheet p.2 (Error Code Chart)
Row E97 of the dryer chart, page 2.
The chart lists no wiring condition for E97. Its two conditions are wrong configuration data loaded and a defective electronic control board.
The chart's only solution for E97 is to replace the electronic control board, so we do not offer a re-flash.
Not if the stored data is wrong. A reset clears the message, but the program mismatch is still there when the dryer powers up.
For E97, the model number and any history of control board work, since a board meant for another model is the plain cause.
Codes, symptoms, parts and service
E93 is a machine configuration checksum error on Electrolux's dryer chart: the wrong configuration data was loaded, or the interface board, control board or wiring is defective. Book a technician; the chart replaces the interface board and/or console.
Most dryer noise has a simple source: coins or buckles in the drum, a loose pedestal, shipping bolts still in place or a dryer that is out of level. Electrolux also lists sounds that are normal, such as the chime at the end of a cycle.
The dryer electronic control board is the main board of an Electrolux front-load dryer, and the interface board is the console board that talks to it. Electrolux's dryer chart names the control board for E54, E67, E94, E97 and EA5, and the pair for E91 to E93. Owners can restart the dryer once; board work is for a technician.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.