What it means
F95 is a motor door lock mechanism failure on Electrolux's modular wall oven control: the lock motor does not stop running, or the lock switch sends an invalid signal. Reset power; if F95 returns, book a technician.
Electrolux oven F95 / Door lock
F95 is a motor door lock mechanism failure on Electrolux's modular wall oven control: the lock motor does not stop running, or the lock switch sends an invalid signal. Reset power; if F95 returns, book a technician.
Also shown as F95
F95 is a motor door lock mechanism failure on Electrolux's modular wall oven control: the lock motor does not stop running, or the lock switch sends an invalid signal. Reset power; if F95 returns, book a technician.
Shut off the oven at the breaker, wait 30 seconds, then restore power.
F95 returns or the lock motor keeps running.
Your checklist, kept on this device

Shut off the oven at the breaker, wait 30 seconds, then restore power.

Does it keep humming or running after the door has locked or unlocked? Tell us.

If the door is stuck, press UNLOCK and follow the screen.

The lock assembly and its switch are wired at line voltage.

If the motor runs all the time, the sheet replaces the oven relay board. If it does not, it replaces the motor lock assembly.
Send us the model and the checks you have done, and open your request here.
Book a visitA simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
The door lock motor turns the latch that holds the oven door shut during self-clean.
Read the definitionThe motor door lock mechanism has failed: the lock motor does not stop running, or the lock switch gives an invalid signal.
Read the supporting manualA faulty lock switch or a defective oven relay board.
Read the supporting manualThe sheet replaces the motor lock assembly.
Read the supporting manualF90 is a lock motor that does not run as expected. F95 is a motor that does not stop.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
Models: EI30EW38TS
p/n A00980644 Rev A (2017/05) / PDF p.2
Row F95 of the 2017 modular-control sheet, page 2, modular oven controls.
A lock motor that runs on and on can wear out and leave the door locked. It is not a heat hazard by itself.
Try UNLOCK and follow the screen. If the door still will not open, do not force it.
No. F97 is a lock state the relay board did not expect.
For F95, the model number and whether the lock motor runs continuously.
Codes, symptoms, parts and service
F90 on an Electrolux oven is a door lock motor mechanism failure. The ES630 sheet says door motor mechanism failure, and the modular sheet says the control does not see the lock motor running. Press UNLOCK if the door is locked, then reset the power.
The written Electrolux articles say little about setting the clock or timer, since its display-settings guide is a video. What they do cover is a display or keypad that acts up: a stuck key (F11), memory and cable errors (F13, F14, F15), Demo mode and a power reset.
The door lock motor turns the latch that holds the oven door shut during self-clean. Electrolux’s sheets use F90 for a failure of that mechanism, and the modular sheet adds F95 and F97. The owner guide groups F90 to F94 as a door lock issue.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.