What it means
E59 means the control got no spin signal from the motor for 3 seconds. The 2018 Electrolux washer sheet does not show it on the display. Check the load, unplug the washer, and book a technician for test 9.
Electrolux washer E59 / Motor
E59 means the control got no spin signal from the motor for 3 seconds. The 2018 Electrolux washer sheet does not show it on the display. Check the load, unplug the washer, and book a technician for test 9.
Also shown as E59
E59 means the control got no spin signal from the motor for 3 seconds. The 2018 Electrolux washer sheet does not show it on the display. Check the load, unplug the washer, and book a technician for test 9.
A drum jammed with heavy laundry can fail to turn at all.
The drum does not turn, E59 recurs or the motor hums without moving it.
Your checklist, kept on this device

A drum jammed with heavy laundry can fail to turn at all. Stop, unplug and remove some of it.

With the plug out, rotate the drum by hand. A drum that will not move points to a mechanical bind.

A coin or underwire stuck between tub and drum is a classic cause of binding; look through the door opening.

A hum without rotation tells a technician the motor is powered but not turning.

Test 9 removes the belt, measures the motor's speed sensor and winding values, then replaces parts as they fail.
Send us the model and the checks you have done, and open your request here.
Book a visit
A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
The control expected a rotation signal and got none for three seconds. The sheet's wording is no spin signal for 3 seconds.
Read the supporting manualTest 9 adds a resistance check of the speed-sensor leads, pins 4 and 5 on the motor plug, which should read 105 to 130 ohms, before it measures the windings.
Read the supporting manualIt can follow one if the drum jams, but the sheet treats it as a sensor or motor row.
Read the supporting manualStopped drums and live motor circuits are not for owners to open. Keep power off.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.1 (Washer Error Codes)
Row 59 of the 2018 washer sheet: test 9, which E55 also uses.
A feedback pulse from the motor that tells the control how fast the drum turns.
The sheet removes the belt as a test step, but it does not name a snapped belt as a cause.
No. For E59 the sheet's display column says no, so the first sign is a drum that does not turn and a stopped cycle.
If the drum turns freely and the rinse finishes, yes. If E59 returns, stop, since the motor may not be reporting its speed.
Codes, symptoms, parts and service
Electrolux's washer sheet reads E55 as motor under speed: the drum is turning more slowly than the control asked. It appears on select models and not on 300 series. Check for a heavy or unbalanced load first, then book a technician.
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.