Inside the appliance
Washer main control board. In plain English.
The main control board runs an Electrolux front-load washer and talks to the user interface and the motor control. Electrolux's washer sheet names it for E91 to E94, E97 and E98, and for E84 where it says to replace the main board. The first step is one restart.

Where it fits.
Washer main control board in the appliance
Inside the cabinet; the washer sheet does not locate it.
The image shows the type of component only. It does not select a replacement that fits your model.
What is different once this system needs attention.
Washer main control board concerns may show up with a drop in performance or a code that keeps returning. Testing comes first before anyone decides the component has failed.

Electrolux washer not spinning
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.

Electrolux washer detergent dispenser problems
Dispenser trouble on an Electrolux front loader usually comes from the wrong detergent, too much of it, a drawer that is not seated or buildup in the compartments. Detergent packs belong in the drum, not the drawer.
Owner care, within the model instructions.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Power-cycle once
Unplug the washer for a minute and plug it back in. A single glitch can clear; a real mismatch comes straight back.
- 2
Leave the buttons alone
Pressing keys over and over while the code is up can confuse the panel. Let the washer settle after the restart.
- 3
Think back to repairs
Boards that came from another washer are the classic reason two boards disagree. Tell us if anything was replaced.
- 4
Photograph the display
E91, E93, E94 and E97 show on the display, so a picture helps the technician.
- 5
Do not force a cycle
If the washer rejects the cycle you pick, leave it off until it is checked.
Cleaning or replacement?
Leave internal testing to a technician.
E91, E93, E94, E97 or E98 returns after one restart.
The washer will not start any cycle.
A board was replaced recently and the codes began after.
Arrange a diagnosticSources and model boundaries.
These sources back the Washer main control board guidance. Use the manual for your own model.
- Washer Tech Data Sheet, A11200302 (1803)
Follow the guide for your exact model. Consult how we research these pages.
What does E94 mean on an Electrolux washer?
It is a main board control problem: an incompatible cycle configuration. The display shows it. Restart once and book a technician if it returns.
What is the difference between the main board and motor control?
The main board runs the cycles. The motor control drives the motor. E98 means the two are incompatible.
Which codes show on the display?
The sheet marks 91, 93, 94 and 97 as shown on the display. E98 is not shown, so a technician reads it.
Can I replace the board myself?
We do not recommend it. The sheet's tests check wiring between boards before replacing one, and the washer runs on household power.
Could a recent repair cause these codes?
Yes. A board from a different washer can load the wrong configuration. Tell the technician what was replaced.
Codes, symptoms, parts and service
Link the message to what to do next.
E91
E91 is a user interface protocol incongruence error on Electrolux's 2018 washer sheet: the console and the main board are not speaking the same protocol. The display shows it. Power-cycle once, then book a technician for the interface board test.
Electrolux washer not spinning
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
Washer repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.
