Inside the appliance
Washer motor control board (inverter). In plain English.
The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer. Electrolux's washer sheet lists it for E57 (high current on the inverter), E5A (high temperature from overload), E5C, E5D and E5F, and for E98. The sheet is for technicians; owners reduce the load and unplug the washer.

Where it fits.
Washer motor control board (inverter) in the appliance
Inside the cabinet near the drive motor; the sheet only describes wiring between it and the main board.
The image shows the type of component only. It does not select a replacement that fits your model.
What is different once this system needs attention.
Washer motor control board (inverter) concerns may show up with a drop in performance or a code that keeps returning. Testing comes first before anyone decides the component has failed.
Owner care, within the model instructions.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Stop and unplug
A current alarm means the drive is working hard. Cut the power before opening the door or touching the drum.
- 2
Check the weight
Test 8 begins by asking if the washer was overloaded. Remove laundry until it is a normal load.
- 3
Let it cool
E5A is high temperature on the motor control from overload. Let the washer cool unplugged.
- 4
Do not use extension cords
E5C is high voltage at the motor control. Plug the washer directly into its outlet.
- 5
Mention recent boards
E98 means the motor control and main board are incompatible. Say so if either board was replaced.
Cleaning or replacement?
Leave internal testing to a technician.
E57, E58, E5A, E5C, E5D or E5F returns after the washer cools.
The drum will not spin.
You notice a burning smell near the back.
Arrange a diagnosticSources and model boundaries.
These sources back the Washer motor control board (inverter) guidance. Use the manual for your own model.
- Washer Tech Data Sheet, A11200302 (1803)
Follow the guide for your exact model. Consult how we research these pages.
What is the motor control on an Electrolux washer?
It is the board that drives the motor, called the inverter on the sheet. E57 is high current on the inverter.
Do E57 and E5A show on the display?
No. The sheet marks them as not shown on the display. A technician reads them from the stored code.
What does E5C mean?
High voltage reached the motor control board. The sheet has the power company or a professional check the supply voltage and frequency.
What does E5F mean?
The motor control is continuously resetting. The sheet's tests are wiring and board checks, so book a technician.
Can overloading cause a code?
Yes. Test 8 starts by asking whether the washer was overloaded. Run a smaller load and book a visit if the code returns.
Codes, symptoms, parts and service
Link the message to what to do next.
E57
E57 is high current on the inverter, the motor control, in Electrolux's 2018 washer sheet. The display does not show E57. Unplug the washer, reduce an overloaded drum if you can, and book a technician for the motor tests.
Electrolux washer not spinning
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
Washer repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.

