What it means
E5E is a communication failure coming from the motor control on the 2018 Electrolux washer sheet. The display does not show E5E. Reset the power once; if it returns, book a technician for the board wiring test.
Electrolux washer E5E / Motor
E5E is a communication failure coming from the motor control on the 2018 Electrolux washer sheet. The display does not show E5E. Reset the power once; if it returns, book a technician for the board wiring test.
Also shown as E5E
E5E is a communication failure coming from the motor control on the 2018 Electrolux washer sheet. The display does not show E5E. Reset the power once; if it returns, book a technician for the board wiring test.
Pull the plug for a minute, plug back in and run a short cycle.
E5E returns after a power cycle.
Your checklist, kept on this device

Pull the plug for a minute, plug back in and run a short cycle.

Both circuit boards live behind panels and carry line voltage on some terminals.

Does E5E show up at power-on or midway through a spin? That helps the visit.

Wait ten seconds after power-on and hold Temp and Select for three seconds.

Test 10 starts with the wiring between the two boards. Give us the model number and the stored code when you book.
Send us the model and the checks you have done, and open your request here.
Book a visit
A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer.
Read the definitionThe motor control talks back to the main board, and that return message failed. The sheet calls it communication problem from motor control (communication failure).
Read the supporting manualOne covers a message to the motor control and the other a failure of communication from it. A technician sees which direction broke.
Read the supporting manualThe sheet cleans up wiring first, then replaces the main board, then the motor control board.
Read the supporting manualA drive that cannot report back may stop mid-cycle. Plan a visit.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.2 (Washer Error Codes)
Row 5E of the 2018 washer sheet, test 10.
It means the drive board cannot answer the main board, so the washer cannot control its motor reliably. Do not run long cycles.
No. For E5E the sheet's display column says no, so use the stored-error recall to confirm it.
No. E5F means the motor control is continuously resetting. E5E is a failed communication from it. Both use test 10.
The sheet names no cause beyond wiring and the boards, so we cannot say. Keeping the area dry is still sensible.
Codes, symptoms, parts and service
E5D is a communication problem with the motor control, a message that did not arrive, on Electrolux's 2018 washer sheet. The display does not show E5D. Unplug and book a technician; the sheet's test is a wiring check between two boards.
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer. Electrolux's washer sheet lists it for E57 (high current on the inverter), E5A (high temperature from overload), E5C, E5D and E5F, and for E98. The sheet is for technicians; owners reduce the load and unplug the washer.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.