Electrolux washer E5D / Motor

Electrolux washer
error E5D

Washer / display referenceE5D

E5D is a communication problem with the motor control, a message that did not arrive, on Electrolux's 2018 washer sheet. The display does not show E5D. Unplug and book a technician; the sheet's test is a wiring check between two boards.

Also shown as E5D

Last reviewed

Washer / display referenceE5D
Meaning
E5D is a communication problem with the motor control, a message that did not arrive, on Electrolux's 2018 washer sheet. The display does not show E5D. Unplug and book a technician; the sheet's test is a wiring check between two boards.
Who handles it
Technician
Related codes
Source
Washer Tech Data Sheet, A11200302 (1803)

What Electrolux washer E5D means.

What it means

E5D is a communication problem with the motor control, a message that did not arrive, on Electrolux's 2018 washer sheet. The display does not show E5D. Unplug and book a technician; the sheet's test is a wiring check between two boards.

What you can safely check

Unplug the washer for one minute and plug it back in.

When to call a technician

E5D comes back after a one-minute power cycle.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux washer E5D: Rear of a washer with the back panel off showing the motor, belt and wiring plug, while a gloved palm holds two carbon brushes; cord unplugged
    Illustration. Follow your model’s instructions.
    Before you begin

    Power off for a minute

    Unplug the washer for one minute and plug it back in. Communication errors sometimes clear on a power cycle.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Do not wiggle connectors

    The wiring between the main and motor boards sits inside the cabinet. Leave it to a technician.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Watch for repeats

    If E5D follows soon after a reset, tell us how long the washer ran.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Recall the stored code

    Switch the washer on, let ten seconds pass, then press Temp and Select together and keep them down for three seconds.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    Test 10: check wiring between the main and motor control boards, then the main board, then the motor control.

Still showing E5D?

Send us the model and the checks you have done, and open your request here.

Book a visit

The drum drive.

Conceptual Washer sectionDrumMotorDriveControl1234
  1. 1Drum
  2. 2Motor
  3. 3Drive

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Front-load washer with the door swung open to an empty, dry stainless drum, with a console dial and panel above

Component reference

Washer motor control board (inverter)

The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer.

Read the definition

A little more context.

What does E5D mean?

The main board and the motor control board lost their conversation: a message was not received. The sheet lists it as communication problem with motor control (message).

Read the supporting manual

How is E5D different from E5E?

E5D concerns the message to the motor control, E5E the communication from it. Both share test 10.

Read the supporting manual

What does test 10 do?

Check wiring between the main control board and the motor control board. If it is bad, correct it. If good, replace the main board, then the motor control board if needed.

Read the supporting manual

The manual behind the message.

Manufacturer document

Washer Tech Data Sheet, A11200302 (1803)

Electrolux (technician sheet; retailer-hosted copy)

A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.2 (Washer Error Codes)

Row 5D of the 2018 washer sheet: test 10, shared with E5E, E5F, E83, E94 and E98.

Here to help

Good questions.
Clear answers.

Talk to our team
Is E5D a software issue?

The sheet does not say. It sends E5D to a wiring test between two boards, then to the boards themselves.

Can unplugging fix E5D?

It may clear the message for a while. A communication problem that returns after the restart is a wiring or board matter.

Does E5D show?

No. For E5D the sheet's display column says no, so confirm it through the stored-error recall.

Which board gets replaced first?

The main control board. If E5D remains after that, the sheet replaces the motor control board.

Let’s take care of it.

Premium appliances deserve
careful service.