What it means
E5F means the motor control is continuously resetting, according to Electrolux's 2018 washer sheet. The display does not show E5F. Unplug the washer and book a technician for the wiring and board test.
Electrolux washer E5F / Motor
E5F means the motor control is continuously resetting, according to Electrolux's 2018 washer sheet. The display does not show E5F. Unplug the washer and book a technician for the wiring and board test.
Also shown as E5F
E5F means the motor control is continuously resetting, according to Electrolux's 2018 washer sheet. The display does not show E5F. Unplug the washer and book a technician for the wiring and board test.
A board that keeps resetting is not reliable.
E5F recurs or the washer stops repeatedly.
Your checklist, kept on this device

A board that keeps resetting is not reliable. Leave the power off until a technician has looked.

Mention flickering lights or a loose outlet; unstable power can cause resets.

Connectors on the boards are easily damaged and carry line voltage on some terminals, so leave them in place.

Ten seconds after power-up, hold Temp and Select three seconds.

Test 10 covers wiring, the main board and the motor control board.
Send us the model and the checks you have done, and open your request here.
Book a visit
A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer.
Read the definitionThe motor control (MC) restarts again and again. The sheet's line reads MC is continuously resetting.
Read the supporting manualTest 10 for all three: wiring between main and motor boards, then main board, then motor control.
Read the supporting manualUnstable supply can cause resets, so the technician may measure at the plug.
Read the supporting manualA resetting drive typically stops the cycle.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.2 (Washer Error Codes)
Row 5F of the 2018 washer sheet, test 10.
MC stands for motor control, the drive board that runs the washer's motor. It sits apart from the main control board.
No. For E5F the sheet's display column says no, so the stored-error recall is how you confirm it.
Only temporarily. A drive board that keeps resetting will usually do so again once the washer starts a cycle.
Nothing on the sheet is an owner step. The test 10 wiring and board checks need the cabinet open.
Codes, symptoms, parts and service
E5D is a communication problem with the motor control, a message that did not arrive, on Electrolux's 2018 washer sheet. The display does not show E5D. Unplug and book a technician; the sheet's test is a wiring check between two boards.
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer. Electrolux's washer sheet lists it for E57 (high current on the inverter), E5A (high temperature from overload), E5C, E5D and E5F, and for E98. The sheet is for technicians; owners reduce the load and unplug the washer.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.