What it means
E57 is high current on the inverter, the motor control, in Electrolux's 2018 washer sheet. The display does not show E57. Unplug the washer, reduce an overloaded drum if you can, and book a technician for the motor tests.
Electrolux washer E57 / Motor
E57 is high current on the inverter, the motor control, in Electrolux's 2018 washer sheet. The display does not show E57. Unplug the washer, reduce an overloaded drum if you can, and book a technician for the motor tests.
Also shown as E57
E57 is high current on the inverter, the motor control, in Electrolux's 2018 washer sheet. The display does not show E57. Unplug the washer, reduce an overloaded drum if you can, and book a technician for the motor tests.
A current alarm means the drive is working hard or something is wrong in it.
E57 returns with a light load, or there is any burning smell.
Your checklist, kept on this device

A current alarm means the drive is working hard or something is wrong in it. Cut the power before opening the door or touching the drum.

Test 8 begins by asking if the washer was overloaded. Remove laundry until it is a normal load.

With the plug out, see whether the drum turns freely. Scraping or heavy resistance is a bearing or belt clue to mention.

Burning smells or scorch marks near the back panel are important for a technician to hear about. Do not run the washer again.

Checking motor windings and replacing the motor or control board is the next sheet step.
Send us the model and the checks you have done, and open your request here.
Book a visit
A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer.
Read the definitionThe inverter that drives the motor drew more current than allowed. The sheet's row reads high current on inverter (motor control), no display notification.
Read the supporting manualWhether the unit was overloaded, then whether the motor and tub pulleys spin freely, then the motor windings, which should read between 3 and 6 ohms.
Read the supporting manualOne retry with a lighter load is reasonable. If the code returns, stop, since the cause may be electrical.
Read the supporting manualE57 is inverter current; E58 is current on the motor phase. They share test 8, so the work is the same.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.1 (Washer Error Codes)
Row 57 of the 2018 washer sheet. Test 8 applies. Stored-only code.
It is the first thing the sheet asks about, so check it before booking.
That clears the message only. If the cause remains the code returns.
Not first. The motor is replaced when it fails the free-spin or winding checks.
The model, the load size, and any noise or smell before the stop.
Codes, symptoms, parts and service
E58 is high current on the motor phase in Electrolux's 2018 washer sheet, one of the codes the display does not show. Unplug the washer, take weight out of the drum, and book a technician to test the motor.
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer. Electrolux's washer sheet lists it for E57 (high current on the inverter), E5A (high temperature from overload), E5C, E5D and E5F, and for E98. The sheet is for technicians; owners reduce the load and unplug the washer.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.