Electrolux washer E5C / Motor

Electrolux washer
error E5C

Washer / display referenceE5C

E5C means high voltage reached the motor control board, per Electrolux's 2018 washer sheet. The display does not show E5C. Book a technician; the sheet has the power company or a professional check supply voltage and frequency under load.

Also shown as E5C

Last reviewed

Washer / display referenceE5C
Meaning
E5C means high voltage reached the motor control board, per Electrolux's 2018 washer sheet. The display does not show E5C. Book a technician; the sheet has the power company or a professional check supply voltage and frequency under load.
Who handles it
Technician
Related codes
Source
Washer Tech Data Sheet, A11200302 (1803)

What Electrolux washer E5C means.

What it means

E5C means high voltage reached the motor control board, per Electrolux's 2018 washer sheet. The display does not show E5C. Book a technician; the sheet has the power company or a professional check supply voltage and frequency under load.

What you can safely check

Overvoltage can damage the control.

When to call a technician

E5C recurs or lights flicker around the time it appears.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux washer E5C: Rear of a washer with the back panel off showing the motor, belt and wiring plug, while a gloved palm holds two carbon brushes; cord unplugged
    Illustration. Follow your model’s instructions.
    Before you begin

    Unplug until the visit

    Overvoltage can damage the control. Do not run the washer if you suspect the supply is high.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Note any storm or outage

    A power surge or utility work shortly before the code is worth telling the technician.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Check the plug and cord

    Look for heat damage. Do not use extension cords with the washer.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Look at the stored code

    After ten seconds on, hold Temp and Select three seconds. E5C should be the last error.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    The sheet calls for the supply to be measured under load; if it is correct, it replaces the motor control board.

Still showing E5C?

Send us the model and the checks you have done, and open your request here.

Book a visit

The drum drive.

Conceptual Washer sectionDrumMotorDriveControl1234
  1. 1Drum
  2. 2Motor
  3. 3Drive

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Front-load washer with the door swung open to an empty, dry stainless drum, with a console dial and panel above

Component reference

Washer motor control board (inverter)

The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer.

Read the definition

A little more context.

What does E5C mean?

The motor control board saw more voltage than it accepts. The sheet describes high voltage experienced by motor control board.

Read the supporting manual

Who checks the supply?

The sheet says to have the power company or a professional check frequency and voltage under load. We can measure at the washer, and a utility visit may follow.

Read the supporting manual

Is E5C the same as H2/B2?

Similar in spirit: H2/B2 is a high-supply row on the main board and shares the same supply test. E5C is the motor board's own reading.

Read the supporting manual

The manual behind the message.

Manufacturer document

Washer Tech Data Sheet, A11200302 (1803)

Electrolux (technician sheet; retailer-hosted copy)

A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.2 (Washer Error Codes)

Row 5C of the 2018 washer sheet. Test 12 applies, shared with the H and B codes.

Here to help

Good questions.
Clear answers.

Talk to our team
What causes E5C?

The sheet only says the motor control board saw high voltage. It leaves the cause to the supply measurement it asks for.

Is it a leak?

No. E5C is an electrical reading and has nothing to do with water. The leak row on this sheet is E13.

Does E5C show on the display?

No. For E5C the sheet's display column says no, so the stored-error recall is how you confirm it.

Do I need an electrician?

The sheet involves the power company or a professional for the supply measurement.

Let’s take care of it.

Premium appliances deserve
careful service.